Commit graph

17 commits

Author SHA1 Message Date
noroadsleft
e337bb82a3 Fix Planck and Preonic builds (#5658)
* Planck: Copy contents of Planck rules.mk to each revision

* Planck: Delete Planck rules.mk

* Planck: Concatenate duplicate rules

Concatenate rules that are set and then overridden into one setting.

* Preonic: Copy contents of Preonic rules.mk to each revision

* Preonic: Delete Preonic rules.mk

* Preonic: Concatenate duplicate rules

Concatenate rules that are set and then overridden into one setting.

* Planck: Delete non-specific Bootloader settings from revs. 1 and 2

Deleted BOOTLOADER setting code block, as the checks were only valid for revs. 3-5 and the Planck Light.

Neither Planck rev1 or rev2 set the bootloader via rules.mk, so there's no setting of BOOTLOADER in their rules.mk files.

* Preonic: Fix BOOTLOADER settings code blocks

* Preonic: delete extra blank lines from rules.mk files

* Preonic: delete AVR-type hardware config blocks from rev3

* Update Planck and Preonic readme files

- update Hardware Supported
- update/add Install Examples
- update Docs paragraph

* Enable Bootmagic Lite where it is disabled

Enabled Bootmagic Lite for:

- Planck Light
- Planck revs. 1-5
- Preonic revs. 1 and 2

* Remove `planck_grid` from LAYOUTS rule for all Planck revisions

Community has landed on `ortho_4x12`, which is already set; `planck_grid` is redundant.
2019-04-29 11:04:56 -07:00
Jordi Pakey-Rodriguez
db8d68acdc Add Planck rev1 and rev2, clean up rev3-5 config.h 2019-01-17 18:16:33 -08:00
skullydazed
f4a9e98383
Pull information from config.h and rules.mk (#2711)
* Pull information from config.h and rules.mk

* Readd the kbd75 maintainer
2018-04-07 16:13:48 -07:00
Jack Humbert
9fdc276260
Updates bootloader settings, adds file size check (#2029)
* pull fuse settings for bootloader jump

* fix 32a chips

* make automatic bootloader selection optional

* quantify bootloaders

* fixs #164, speeds up dfu reset

* fix for chips w/o usb

* missing an n

* fix bootloader sizes, use words for addresses

* fix bmini, pearl, and [[ issue, make things quiet

* ignore avr errors on arm for now

* update settings for the light

* document bootloader stuff

* add bootloader title
2017-11-27 23:08:21 -05:00
Jack Humbert
b669d115c2 adds planck light keyboard 2017-11-20 23:37:38 -05:00
Jack Humbert
ec3e065f0d
QMK DFU bootloader generation (#2009)
* adds :bootloader target

* update planck and preonic revisions

* remove references to .h files for planck

* update preonic keymap

* only add keyboard.h files that exist

* add production target

* hook things up with the new lufa variables

* update rules for planck/preonic

* back backlight key turn of status led when pressed

* add manufacturer/product strings to bootloader
2017-11-14 16:11:29 -05:00
Jack Humbert
1683d3a559 adds info.json files to planck 2017-11-01 10:08:40 -04:00
Jack Humbert
800ec55dfc Make arguments redo, subproject elimination (#1784)
* redo make args to use colons, better folder structuring system [skip ci]

* don't put spaces after statements - hard lessons in makefile development

* fix-up some other rules.mk

* give travis a chance

* reset KEYMAPS variable

* start converting keyboards to new system

* try making all with travis

* redo make args to use colons, better folder structuring system [skip ci]

* don't put spaces after statements - hard lessons in makefile development

* fix-up some other rules.mk

* give travis a chance

* reset KEYMAPS variable

* start converting keyboards to new system

* try making all with travis

* start to update readmes and keyboards

* look in keyboard directories for board.mk

* update visualizer rules

* fix up some other keyboards/keymaps

* fix arm board ld includes

* fix board rules

* fix up remaining keyboards

* reset layout variable

* reset keyboard_layouts

* fix remainging keymaps/boards

* update readmes, docs

* add note to makefile error

* update readmes

* remove planck keymap warnings

* update references and docs

* test out tarvis build stages

* don't use stages for now

* don't use stages for now
2017-10-14 11:32:19 -10:00
Jack Humbert
791b9cc652 remove all makefiles from keyboard directories 2017-09-27 08:21:09 -10:00
Jack Humbert
d2ff66a985 Creates a layouts/ folder for keymaps shared between keyboards (#1609)
* include variables and .h files as pp directives

* start layout compilation

* split ergodoxes up

* don't compile all layouts for everything

* might seg fault

* reset layouts variable

* actually reset layouts

* include rules.mk instead

* remove includes from rules.mk

* update variable setting

* load visualizer from path

* adds some more examples

* adds more layouts

* more boards added

* more boards added

* adds documentation for layouts

* use lowercase names for LAYOUT_

* add layout.json files for each layout

* add community folder, default keymaps for layouts

* touch-up default layouts

* touch-up layouts, some keyboard rules.mk

* update documentation for layouts

* fix up serial/i2c switches
2017-08-23 22:29:07 -04:00
Jack Humbert
b476d65b9c Update keyboards' rules.mk/Makefiles (#1442)
this may change some of the keyboards' default settings - if you experience anything odd, please check back to this commit
2017-06-30 16:09:52 -04:00
Jack Humbert
4010360912 adds planck/rev3 makefile so subproject is found 2017-02-12 23:58:44 -05:00
Jack Humbert
18b5c3dccf removes planck/rev3 temporarily 2016-10-18 13:57:56 -04:00
Fred Sundvik
051017c312 Split subproject make files into Makefile and rules.mk 2016-08-20 03:56:23 +03:00
Jack Humbert
197f152dee adds random base64 character generator 2016-06-29 18:29:20 -04:00
Jack Humbert
65faab3b89 Moves features to their own files (process_*), adds tap dance feature (#460)
* non-working commit

* working

* subprojects implemented for planck

* pass a subproject variable through to c

* consolidates clueboard revisions

* thanks for letting me know about conflicts..

* turn off audio for yang's

* corrects starting paths for subprojects

* messing around with travis

* semicolon

* travis script

* travis script

* script for travis

* correct directory (probably), amend files to commit

* remove origin before adding

* git pull, correct syntax

* git checkout

* git pull origin branch

* where are we?

* where are we?

* merging

* force things to happen

* adds commit message, adds add

* rebase, no commit message

* rebase branch

* idk!

* try just pull

* fetch - merge

* specify repo branch

* checkout

* goddammit

* merge? idk

* pls

* after all

* don't split up keyboards

* syntax

* adds quick for all-keyboards

* trying out new script

* script update

* lowercase

* all keyboards

* stop replacing compiled.hex automatically

* adds if statement

* skip automated build branches

* forces push to automated build branch

* throw an add in there

* upstream?

* adds AUTOGEN

* ignore all .hex files again

* testing out new repo

* global ident

* generate script, keyboard_keymap.hex

* skip generation for now, print pandoc info, submodule update

* try trusty

* and sudo

* try generate

* updates subprojects to keyboards

* no idea

* updates to keyboards

* cleans up clueboard stuff

* setup to use local readme

* updates cluepad, planck experimental

* remove extra led.c [ci skip]

* audio and midi moved over to separate files

* chording, leader, unicode separated

* consolidate each [skip ci]

* correct include

* quantum: Add a tap dance feature (#451)

* quantum: Add a tap dance feature

With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.

To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.

With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.

The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.

But lets start with how to use it, first!

First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.

This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:

* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
  tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
  the user keymap - with the current state of the tap-dance action.

The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.

And that's the bulk of it!

Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.

And now, on to the explanation of how it works!

The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.

This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.

Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.

For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.

In the end, lets see a full example!

```c
enum {
 CT_SE = 0,
 CT_CLN,
 CT_EGG
};

/* Have the above three on the keymap, TD(CT_SE), etc... */

void dance_cln (qk_tap_dance_state_t *state) {
  if (state->count == 1) {
    register_code (KC_RSFT);
    register_code (KC_SCLN);
    unregister_code (KC_SCLN);
    unregister_code (KC_RSFT);
  } else {
    register_code (KC_SCLN);
    unregister_code (KC_SCLN);
    reset_tap_dance (state);
  }
}

void dance_egg (qk_tap_dance_state_t *state) {
  if (state->count >= 100) {
    SEND_STRING ("Safety dance!");
    reset_tap_dance (state);
  }
}

const qk_tap_dance_action_t tap_dance_actions[] = {
  [CT_SE]  = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
 ,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
 ,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```

This addresses #426.

Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>

* hhkb: Fix the build with the new tap-dance feature

Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>

* tap_dance: Move process_tap_dance further down

Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.

Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>

* tap_dance: Use conditionals instead of dummy functions

To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.

Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>

* Merge branch 'master' into quantum-keypress-process

# Conflicts:
#	Makefile
#	keyboards/planck/rev3/config.h
#	keyboards/planck/rev4/config.h

* update build script
2016-06-29 17:49:41 -04:00
Jack Humbert
215c2119af Implements subprojects and updates projects for this (#459)
* non-working commit

* working

* subprojects implemented for planck

* pass a subproject variable through to c

* consolidates clueboard revisions

* thanks for letting me know about conflicts..

* turn off audio for yang's

* corrects starting paths for subprojects

* messing around with travis

* semicolon

* travis script

* travis script

* script for travis

* correct directory (probably), amend files to commit

* remove origin before adding

* git pull, correct syntax

* git checkout

* git pull origin branch

* where are we?

* where are we?

* merging

* force things to happen

* adds commit message, adds add

* rebase, no commit message

* rebase branch

* idk!

* try just pull

* fetch - merge

* specify repo branch

* checkout

* goddammit

* merge? idk

* pls

* after all

* don't split up keyboards

* syntax

* adds quick for all-keyboards

* trying out new script

* script update

* lowercase

* all keyboards

* stop replacing compiled.hex automatically

* adds if statement

* skip automated build branches

* forces push to automated build branch

* throw an add in there

* upstream?

* adds AUTOGEN

* ignore all .hex files again

* testing out new repo

* global ident

* generate script, keyboard_keymap.hex

* skip generation for now, print pandoc info, submodule update

* try trusty

* and sudo

* try generate

* updates subprojects to keyboards

* no idea

* updates to keyboards

* cleans up clueboard stuff

* setup to use local readme

* updates cluepad, planck experimental

* remove extra led.c [ci skip]

* disable power up for now

* config files updates

* makefile updates

* .h file updates, config tuning

* disable audio for yang
2016-06-29 16:21:41 -04:00