qmk_firmware/keyboards/ergodox_ez
Drashna Jaelre 4dc89d974b Fix Ergodox EZ Info.json files (#2979)
* Fix Ergodox EZ Info.json files

* Ugh, column stagger!

* Whoops, added offset to wrong axis

* Add changes to Ergodone and Ergodox Infinity
2018-05-20 21:34:18 -07:00
..
keymaps Update to drashna files (#2587) 2018-03-25 13:01:15 -07:00
util
190hotfix.sh
config.h
ergodox_ez.c Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 2018-03-16 16:33:43 -04:00
ergodox_ez.h Add pretty layout to all ergodox clones (#2686) 2018-04-21 17:00:43 -04:00
i2cmaster.h
info.json Fix Ergodox EZ Info.json files (#2979) 2018-05-20 21:34:18 -07:00
matrix.c
readme.md Syntax update (#2660) 2018-04-24 09:49:34 -07:00
rules.mk Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 2018-03-16 16:33:43 -04:00
twimaster.c

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.

  • Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.