qmk_firmware/keyboards/ergodox_ez
lucwastiaux f2bf5a9a74 Keymap: Ergodox Dvorak 42 key layout changes (#3500)
* add SCREEN_NAV layer for copy/pasting within screen

* working readreg/paste macros

* working read reg / paste macros

* write log and tran patterns, and expand

* add ls -la shortcut, add tab on combined layer

* put delete word on the right pinky key on shell_nav layer

* add TAB on the right side, add reset key

* added Cloud9 macros

* add cloud9 shortcuts to atreus layout

* added BROWSER_CONTROL layer

* finalized browser control layer

* adding comment

* add browser control layer to atreus

* add flashing command line

* remove the tab on combined layer

* remove the tomouse

* remove mouse layer, change log/tran expand patterns, cleanups

* add dumptlog macro

* add "delete to home" shortcut

* fix conflict

* remove unneeded mouse layer

* add meh shortcuts on the browser_control layer

* add/modify some macros

* explain the various layers
2018-07-26 14:21:55 -07:00
..
keymaps Keymap: Ergodox Dvorak 42 key layout changes (#3500) 2018-07-26 14:21:55 -07:00
util
190hotfix.sh
config.h
ergodox_ez.c
ergodox_ez.h
i2cmaster.h
info.json
matrix.c
readme.md
rules.mk Revert to RGB Underglow being enabled, rather than rgb matrix 2018-07-08 21:34:53 -07:00
twimaster.c

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.

  • Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.