qmk_firmware/keyboards/launchpad
Drashna Jaelre b05c0e46c6 Adds a default value for IS_COMMAND for COMMAND feature (#4301)
* Add default value for IS_COMMAND for COMMAND feature

* Cleanup and consistency

* Update Templates to reflect change

* Fix IS_COMMAND in template

* Fix IS_COMMAND define

* Use consistent IS_COMMAND block in templates

* Remove unnecessary `#undef IS_COMMAND` directives

* Fix compile issue on orthodox

* Reomve IS_COMMAND option for newer boards

* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting

* Remove a couple of additional IS_COMMAND defines

* Remove remaining redundant IS_COMMAND definitions

* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin

* Remove multiple empty lines in modified config.h files

* Update additional boards

* Reomve IS_COMMAND from newer boards

* Update Alice keyboard

* Remove IS_COMMAND from additional boards

Jan 24th edition
2019-01-26 15:49:45 -08:00
..
keymaps/default
rev1
config.h
launchpad.c
launchpad.h
readme.md
rules.mk

Launch Pad

Launch Pad

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

A budget-minded, 4-8 key macro-pad with built in legs, plate & case.

Supports MX & Alps switches. 2x 1u or 1x 2u supported for each row.

Supports 2u PCB-Mount stabilizers.

Runs off of 1x Pro Micro & 8x diodes (1n4148).

Optional "Reset" switch can be used on the PCB.

A fantastic project for beginners to learn to solder, veteran's of the hobby who want to add an easy macro-pad to their collection, and everyone in between.

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Make example for this keyboard (after setting up your build environment):

make launchpad/rev1:default

See build environment setup then the make instructions for more information.

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Due to PCB tolerance issues outside of our control, the snap-apart legs included on the PCB may need extra padding to prevent a small amount of wobbling once placed properly. We have included small, clear, and semi-permanent "glue dots" in each order (PCB Only -and- Full Kit) to help with this. You may also use plastic wrap, tape, Elmer's glue, hot glue, rubber cement, etc. We advise against using anything more "permanent" in case you wish to make changes to your Launch Pad in the future. It is also best to attach legs after all of your soldering and building is finished, to get the most accurate feel for your Launch Pad.

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-