qmk_firmware/keyboards/frosty_flake
Joe Wasson 6dda0d6e34 More work on Talljoe layout including adding layout support for HHKB and TKL. (#2946)
* Add tap-dancing semicolon.

* Infinity60 was running out of USB space.

* Rename common layout variable so it doesn't collide with some keyboards.

* Godspeed!!!

* Patch the number of LEDs for 1up60rgb

* Don't light up if rgblight is off.

* Add HHKB layout.

* Add HHKB to Talljoe's layout.

* Bring back bananasplit keymap.

* info.json

* Userspace config.h doesn't seem to be setting PREVENT_STUCK_MODIFIERS

* Remove 1uprgb workaround

* Add TKL to talljoe keymap.

Also introduces the tkl layout.
2018-05-12 09:54:35 -07:00
..
keymaps
config.h
frosty_flake.c
frosty_flake.h More work on Talljoe layout including adding layout support for HHKB and TKL. (#2946) 2018-05-12 09:54:35 -07:00
matrix.c
readme.md
rules.mk More work on Talljoe layout including adding layout support for HHKB and TKL. (#2946) 2018-05-12 09:54:35 -07:00

Frosty Flake Controller

This is the firmware for Rev. 20140521 of the Frosty Flake controller by Bathroom Epiphanies, a replacement controller for the Cooler Master Quick Fire Rapid.

The code was adapted from the BathroomEpiphanies TMK Firmware, but has been cleaned up to match the schematic and gone through some minor refactoring for QMK.

104 and 87 layout support

Support for both 104 key and 87 key layouts is provided. See the keymaps default (104) and tkl (87) for example layouts.

Keyboard Maintainer: QMK Community
Hardware Supported: Frosty Flake
Hardware Availability: https://1upkeyboards.com/qfr-frosty-flake-controller.html

Make example for this keyboard (after setting up your build environment):

104 key default layout:

make frosty_flake:default

To directly flash the frosty_flake after compiling use

make frosty_flake:default:dfu

87 key tkl layout:

make frosty_flake:tkl:dfu

See build environment setup then the make instructions for more information.