qmk_firmware/keyboards/idyllic/tinny50_rgb/readme.md

27 lines
1.0 KiB
Markdown
Raw Permalink Normal View History

# Tinny50 RGB Edition
![Tinny50 RGB Edition](https://i.imgur.com/TMig65zh.jpg)
A 50% RGB PCB designed for the Idyllic Tinny50.
* Keyboard Maintainer: Zykrah
* Hardware Supported: Tinny50 RGB Edition PCB
* Hardware Availability: TBA
Make example for this keyboard (after setting up your build environment):
make idyllic/tinny50_rgb:default
Flashing example for this keyboard:
make idyllic/tinny50_rgb:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press both the `BOOT` and `RESET` buttons at the same time
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available