qmk_firmware/keyboards/jm60/readme.md

JM60
========

A compact 60% keyboard with full RGB led support.

Keyboard Maintainer: QMK Community
Hardware Supported: JM60
Hardware Availability: https://kbdfans.myshopify.com/ (is no longer sold)

Make example for this keyboard (after setting up your build environment):

    make jm60:default:bin

See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

## Flashing Instructions

1) from the `qmk_firmware` directory run:
```
$ make jm60:default:bin
```

2) rename 'jm60_default.bin' to 'jm60_default.firmware'

3) Press 'R' and reconnect the keyboard.

4) Start the original Configuration Tool and flash 'jm60_default.bin'
Basic support for JM60 keyboard This adds basic support for JM60 RGB PCB that was sold by KBDfans https://kbdfans.myshopify.com/ https://www.aliexpress.com/store/product/JM60-RGB60-Custom-mechanical-keyboard-PCB-ANSI/2230037_32810956675.html No support for RGB Backlight yet. 2017-08-25 09:48:40 -07:00			`JM60`
			`========`

			`A compact 60% keyboard with full RGB led support.`

			`Keyboard Maintainer: QMK Community`
			`Hardware Supported: JM60`
			`Hardware Availability: https://kbdfans.myshopify.com/ (is no longer sold)`

			`Make example for this keyboard (after setting up your build environment):`

Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now 2017-10-14 14:32:19 -07:00			`make jm60:default:bin`
Basic support for JM60 keyboard This adds basic support for JM60 RGB PCB that was sold by KBDfans https://kbdfans.myshopify.com/ https://www.aliexpress.com/store/product/JM60-RGB60-Custom-mechanical-keyboard-PCB-ANSI/2230037_32810956675.html No support for RGB Backlight yet. 2017-08-25 09:48:40 -07:00
			`See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.`

			`## Flashing Instructions`

			1) from the `qmk_firmware` directory run:
			```
Make arguments redo, subproject elimination (#1784) * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * redo make args to use colons, better folder structuring system [skip ci] * don't put spaces after statements - hard lessons in makefile development * fix-up some other rules.mk * give travis a chance * reset KEYMAPS variable * start converting keyboards to new system * try making all with travis * start to update readmes and keyboards * look in keyboard directories for board.mk * update visualizer rules * fix up some other keyboards/keymaps * fix arm board ld includes * fix board rules * fix up remaining keyboards * reset layout variable * reset keyboard_layouts * fix remainging keymaps/boards * update readmes, docs * add note to makefile error * update readmes * remove planck keymap warnings * update references and docs * test out tarvis build stages * don't use stages for now * don't use stages for now 2017-10-14 14:32:19 -07:00			`$ make jm60:default:bin`
Basic support for JM60 keyboard This adds basic support for JM60 RGB PCB that was sold by KBDfans https://kbdfans.myshopify.com/ https://www.aliexpress.com/store/product/JM60-RGB60-Custom-mechanical-keyboard-PCB-ANSI/2230037_32810956675.html No support for RGB Backlight yet. 2017-08-25 09:48:40 -07:00			```

			`2) rename 'jm60_default.bin' to 'jm60_default.firmware'`

			`3) Press 'R' and reconnect the keyboard.`

			`4) Start the original Configuration Tool and flash 'jm60_default.bin'`