VIA V3 - The Custom UI Update (#18222)

This commit is contained in:
Wilba 2022-11-10 07:46:44 +11:00 committed by GitHub
parent 575b0e33fa
commit bc6f8dc8b0
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
68 changed files with 751 additions and 886 deletions

View File

@ -82,9 +82,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// 6 for 3x custom encoder settings, left, right, and press (18 bytes)
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 21
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE
/*
* Feature disable options
* These options are also useful to firmware size reduction.

View File

@ -102,113 +102,142 @@ void backlight_set_value( uint8_t *data )
}
}
void raw_hid_receive_kb( uint8_t *data, uint8_t length )
{
uint8_t *command_id = &(data[0]);
uint8_t *command_data = &(data[1]);
switch ( *command_id )
{
case id_get_keyboard_value:
{
switch( command_data[0])
{
case id_oled_default_mode:
{
uint8_t default_oled = eeprom_read_byte((uint8_t*)EEPROM_DEFAULT_OLED);
command_data[1] = default_oled;
break;
}
case id_oled_mode:
{
command_data[1] = oled_mode;
break;
}
case id_encoder_modes:
{
command_data[1] = enabled_encoder_modes;
break;
}
case id_encoder_custom:
{
uint8_t custom_encoder_idx = command_data[1];
uint16_t keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_CW);
command_data[2] = keycode >> 8;
command_data[3] = keycode & 0xFF;
keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_CCW);
command_data[4] = keycode >> 8;
command_data[5] = keycode & 0xFF;
keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_PRESS);
command_data[6] = keycode >> 8;
command_data[7] = keycode & 0xFF;
break;
}
default:
{
*command_id = id_unhandled;
break;
}
}
break;
}
case id_set_keyboard_value:
{
switch(command_data[0]){
void custom_set_value(uint8_t *data) {
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch ( *value_id ) {
case id_oled_default_mode:
{
eeprom_update_byte((uint8_t*)EEPROM_DEFAULT_OLED, command_data[1]);
break;
eeprom_update_byte((uint8_t*)EEPROM_DEFAULT_OLED, value_data[0]);
break;
}
case id_oled_mode:
{
oled_mode = command_data[1];
oled_request_wakeup();
break;
oled_mode = value_data[0];
oled_request_wakeup();
break;
}
case id_encoder_modes:
{
enabled_encoder_modes = command_data[1];
eeprom_update_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES, enabled_encoder_modes);
break;
uint8_t index = value_data[0];
uint8_t enable = value_data[1];
enabled_encoder_modes = (enabled_encoder_modes & ~(1<<index)) | (enable<<index);
eeprom_update_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES, enabled_encoder_modes);
break;
}
case id_encoder_custom:
{
uint8_t custom_encoder_idx = command_data[1];
uint8_t encoder_behavior = command_data[2];
uint16_t keycode = (command_data[3] << 8) | command_data[4];
set_custom_encoder_config(custom_encoder_idx, encoder_behavior, keycode);
break;
uint8_t custom_encoder_idx = value_data[0];
uint8_t encoder_behavior = value_data[1];
uint16_t keycode = (value_data[2] << 8) | value_data[3];
set_custom_encoder_config(custom_encoder_idx, encoder_behavior, keycode);
break;
}
default:
}
}
void custom_get_value(uint8_t *data) {
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch ( *value_id ) {
case id_oled_default_mode:
{
*command_id = id_unhandled;
break;
uint8_t default_oled = eeprom_read_byte((uint8_t*)EEPROM_DEFAULT_OLED);
value_data[0] = default_oled;
break;
}
case id_oled_mode:
{
value_data[0] = oled_mode;
break;
}
case id_encoder_modes:
{
uint8_t index = value_data[0];
value_data[1] = (enabled_encoder_modes & (1<<index)) ? 1 : 0;
break;
}
case id_encoder_custom:
{
uint8_t custom_encoder_idx = value_data[0];
uint8_t encoder_behavior = value_data[1];
uint16_t keycode = retrieve_custom_encoder_config(custom_encoder_idx, encoder_behavior);
value_data[2] = keycode >> 8;
value_data[3] = keycode & 0xFF;
break;
}
}
break;
}
case id_lighting_set_value:
{
backlight_set_value(command_data);
break;
}
// TODO
// Refactor so this keyboard uses QMK Core backlight code,
// then change this to via_custom_value_command_kb() so it
// only handles the custom values not the backlight
// (i.e. use QMK Core default handler for backlight values).
//
void via_custom_value_command(uint8_t *data, uint8_t length) {
uint8_t *command_id = &(data[0]);
uint8_t *channel_id = &(data[1]);
uint8_t *value_id_and_data = &(data[2]);
if ( *channel_id == id_qmk_backlight_channel ) {
switch ( *command_id )
{
case id_custom_set_value:
{
backlight_set_value(value_id_and_data);
break;
}
case id_custom_get_value:
{
backlight_get_value(value_id_and_data);
break;
}
case id_custom_save:
{
backlight_config_save();
break;
}
default:
{
// Unhandled message.
*command_id = id_unhandled;
break;
}
}
} else if ( *channel_id == id_custom_channel ) {
switch ( *command_id )
{
case id_custom_set_value:
{
custom_set_value(value_id_and_data);
break;
}
case id_custom_get_value:
{
custom_get_value(value_id_and_data);
break;
}
case id_custom_save:
{
// values are saved in custom_set_value()
break;
}
default:
{
// Unhandled message.
*command_id = id_unhandled;
break;
}
}
return;
}
case id_lighting_get_value:
{
backlight_get_value(command_data);
break;
}
case id_lighting_save:
{
backlight_config_save();
break;
}
default:
{
// Unhandled message.
*command_id = id_unhandled;
break;
}
}
// DO NOT call raw_hid_send(data,length) here, let caller do this
*command_id = id_unhandled;
// DO NOT call raw_hid_send(data,length) here, let caller do this
}
#endif

View File

@ -30,8 +30,8 @@ enum my_keycodes {
OLED_TOGG
};
enum s75_keyboard_value_id {
id_encoder_modes = 0x80,
enum s75_custom_value_id {
id_encoder_modes = 1,
id_oled_default_mode,
id_encoder_custom,
id_oled_mode

View File

@ -130,7 +130,4 @@
# define ENABLE_RGB_MATRIX_SOLID_SPLASH
# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
// This allows VIA to control RGB Matrix settings in the 'Lighting' section.
#define VIA_QMK_RGBLIGHT_ENABLE
#endif /* RGB_MATRIX_ENABLE */

View File

@ -3,5 +3,4 @@
#pragma once
#define VIA_CUSTOM_LIGHTING_ENABLE
#define DYNAMIC_KEYMAP_LAYER_COUNT 2

View File

@ -17,115 +17,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI,
KC_TRNS, GUI_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_RMOD,RGB_VAD, RGB_MOD)
};
#if defined(RGB_MATRIX_ENABLE) && defined(VIA_CUSTOM_LIGHTING_ENABLE)
// VIA supports only 4 discrete values for effect speed; map these to some
// useful speed values for RGB Matrix.
enum speed_values {
RGBLIGHT_SPEED_0 = UINT8_MAX / 16, // not 0 to avoid really slow effects
RGBLIGHT_SPEED_1 = UINT8_MAX / 4,
RGBLIGHT_SPEED_2 = UINT8_MAX / 2, // matches the default value
RGBLIGHT_SPEED_3 = UINT8_MAX / 4 * 3, // UINT8_MAX is really fast
};
static uint8_t speed_from_rgblight(uint8_t rgblight_speed) {
switch (rgblight_speed) {
case 0:
return RGBLIGHT_SPEED_0;
case 1:
return RGBLIGHT_SPEED_1;
case 2:
default:
return RGBLIGHT_SPEED_2;
case 3:
return RGBLIGHT_SPEED_3;
}
}
static uint8_t speed_to_rgblight(uint8_t rgb_matrix_speed) {
if (rgb_matrix_speed < ((RGBLIGHT_SPEED_0 + RGBLIGHT_SPEED_1) / 2)) {
return 0;
} else if (rgb_matrix_speed < ((RGBLIGHT_SPEED_1 + RGBLIGHT_SPEED_2) / 2)) {
return 1;
} else if (rgb_matrix_speed < ((RGBLIGHT_SPEED_2 + RGBLIGHT_SPEED_3) / 2)) {
return 2;
} else {
return 3;
}
}
void via_qmk_rgblight_get_value(uint8_t *data) {
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch (*value_id) {
case id_qmk_rgblight_brightness: {
value_data[0] = rgb_matrix_get_val();
break;
}
case id_qmk_rgblight_effect: {
value_data[0] = rgb_matrix_is_enabled() ? rgb_matrix_get_mode() : 0;
break;
}
case id_qmk_rgblight_effect_speed: {
value_data[0] = speed_to_rgblight(rgb_matrix_get_speed());
break;
}
case id_qmk_rgblight_color: {
value_data[0] = rgb_matrix_get_hue();
value_data[1] = rgb_matrix_get_sat();
break;
}
}
}
void via_qmk_rgblight_set_value(uint8_t *data) {
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch (*value_id) {
case id_qmk_rgblight_brightness: {
rgb_matrix_sethsv_noeeprom(rgblight_get_hue(), rgblight_get_sat(), value_data[0]);
break;
}
case id_qmk_rgblight_effect: {
if (value_data[0] == 0) {
rgb_matrix_disable_noeeprom();
} else {
rgb_matrix_enable_noeeprom();
rgb_matrix_mode_noeeprom(value_data[0]);
}
break;
}
case id_qmk_rgblight_effect_speed: {
rgb_matrix_set_speed_noeeprom(speed_from_rgblight(value_data[0]));
break;
}
case id_qmk_rgblight_color: {
rgb_matrix_sethsv_noeeprom(value_data[0], value_data[1], rgblight_get_val());
break;
}
}
}
void raw_hid_receive_kb(uint8_t *data, uint8_t length) {
uint8_t *command_id = &(data[0]);
uint8_t *command_data = &(data[1]);
switch (*command_id) {
case id_lighting_set_value:
via_qmk_rgblight_set_value(command_data);
break;
case id_lighting_get_value:
via_qmk_rgblight_get_value(command_data);
break;
case id_lighting_save:
eeconfig_update_rgb_matrix();
break;
default:
// Unhandled message.
*command_id = id_unhandled;
break;
}
}
#endif // defined(RGB_MATRIX_ENABLE) && defined(VIA_CUSTOM_LIGHTING_ENABLE)
};

View File

@ -1,2 +0,0 @@
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
#define VIA_QMK_RGBLIGHT_ENABLE

View File

@ -17,7 +17,3 @@
#pragma once
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
#ifdef RGB_MATRIX_ENABLE
#define VIA_QMK_RGBLIGHT_ENABLE
#endif

View File

@ -135,6 +135,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -135,6 +135,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -133,6 +133,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -1,3 +1,4 @@
VIA_ENABLE = yes
LTO_ENABLE = yes
ENCODER_MAP_ENABLE = yes
CONSOLE_ENABLE = no

View File

@ -133,6 +133,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -43,11 +43,6 @@
/* Disable RGB lighting when PC is in suspend */
#define RGB_DISABLE_WHEN_USB_SUSPENDED
/* Allow VIA to edit lighting */
#ifdef VIA_ENABLE
#define VIA_QMK_RGBLIGHT_ENABLE
#endif
// RGB Matrix Animation modes. Explicitly enabled
// For full list of effects, see:
// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
@ -96,8 +91,3 @@
#define ENABLE_RGB_MATRIX_MULTISPLASH
#define ENABLE_RGB_MATRIX_SOLID_SPLASH
#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
/* Allow VIA to edit lighting */
#ifdef VIA_ENABLE
#define VIA_QMK_RGBLIGHT_ENABLE
#endif

View File

@ -110,8 +110,3 @@
#define ENABLE_RGB_MATRIX_MULTISPLASH
#define ENABLE_RGB_MATRIX_SOLID_SPLASH
#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
/* Allow VIA to edit lighting */
#ifdef VIA_ENABLE
# define VIA_QMK_RGBLIGHT_ENABLE
#endif

View File

@ -1,24 +0,0 @@
/*
Copyright 2021 Mechlovin' Studio
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#ifdef RGB_MATRIX_ENABLE
#define VIA_QMK_RGBLIGHT_ENABLE
#endif

View File

@ -1,23 +0,0 @@
/* Copyright 2022 ML
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define DYNAMIC_KEYMAP_LAYER_COUNT 2
#ifdef RGB_MATRIX_ENABLE
#define VIA_QMK_RGBLIGHT_ENABLE
#endif

View File

@ -1,17 +0,0 @@
/* Copyright 2021 datafx
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define VIA_QMK_RGBLIGHT_ENABLE

View File

@ -1,18 +0,0 @@
/* Copyright 2021 datafx
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define VIA_QMK_RGBLIGHT_ENABLE

View File

@ -18,7 +18,3 @@
#pragma once
#define DYNAMIC_KEYMAP_LAYER_COUNT 2
#ifdef RGB_MATRIX_ENABLE
#define VIA_QMK_RGBLIGHT_ENABLE
#endif

View File

@ -134,9 +134,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE
/* Custom EEPROM start addressing. This is to support
* both 128kb and 256kb versions of F303.
* Register 0x1FFFF7CC holds the size of the flash memory.

View File

@ -134,6 +134,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -25,6 +25,4 @@
#define DYNAMIC_KEYMAP_LAYER_COUNT 8
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 2047
#define VIA_QMK_RGBLIGHT_ENABLE
#define STM32_ONBOARD_EEPROM_SIZE 2048

View File

@ -26,7 +26,5 @@
#define DYNAMIC_KEYMAP_LAYER_COUNT 8
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 2047
#define VIA_QMK_RGBLIGHT_ENABLE
#define STM32_ONBOARD_EEPROM_SIZE 2048

View File

@ -26,7 +26,5 @@
#define DYNAMIC_KEYMAP_LAYER_COUNT 8
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 2047
#define VIA_QMK_RGBLIGHT_ENABLE
#define STM32_ONBOARD_EEPROM_SIZE 2048

View File

@ -174,7 +174,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE
#define VIA_QMK_RGBLIGHT_ENABLE

View File

@ -158,7 +158,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 32
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE
#define VIA_QMK_RGBLIGHT_ENABLE

View File

@ -122,6 +122,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define ENABLE_RGB_MATRIX_MULTISPLASH
#define ENABLE_RGB_MATRIX_SOLID_SPLASH
#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
// // VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -42,72 +42,3 @@ led_config_t g_led_config = { {
// clang-format on
#endif
#endif
#if defined(RGB_MATRIX_ENABLE) && defined(VIA_ENABLE)
void raw_hid_receive_kb(uint8_t *data, uint8_t length) {
uint8_t *command_id = &(data[0]);
uint8_t *command_data = &(data[1]);
switch (*command_id) {
case id_lighting_set_value: {
uint8_t *value_id = &(command_data[0]);
uint8_t *value_data = &(command_data[1]);
switch (*value_id) {
case id_qmk_rgblight_brightness: {
rgb_matrix_sethsv_noeeprom(rgb_matrix_get_hue(), rgb_matrix_get_sat(), scale8(value_data[0], RGB_MATRIX_MAXIMUM_BRIGHTNESS));
break;
}
case id_qmk_rgblight_effect: {
rgb_matrix_mode_noeeprom(value_data[0]);
if (value_data[0] == 0) {
rgb_matrix_disable_noeeprom();
} else {
rgb_matrix_enable_noeeprom();
}
break;
}
case id_qmk_rgblight_effect_speed: {
rgb_matrix_set_speed_noeeprom(value_data[0] * 85);
break;
}
case id_qmk_rgblight_color: {
rgb_matrix_sethsv_noeeprom(value_data[0], value_data[1], rgb_matrix_get_val());
break;
}
}
break;
}
case id_lighting_get_value: {
uint8_t *value_id = &(command_data[0]);
uint8_t *value_data = &(command_data[1]);
switch (*value_id) {
case id_qmk_rgblight_brightness: {
value_data[0] = ((uint16_t)rgb_matrix_get_val() * 255) / RGB_MATRIX_MAXIMUM_BRIGHTNESS;
break;
}
case id_qmk_rgblight_effect: {
value_data[0] = rgb_matrix_get_mode();
break;
}
case id_qmk_rgblight_effect_speed: {
value_data[0] = rgb_matrix_get_speed() / 85;
break;
}
case id_qmk_rgblight_color: {
value_data[0] = rgb_matrix_get_hue();
value_data[1] = rgb_matrix_get_sat();
break;
}
}
break;
}
case id_lighting_save: {
eeconfig_update_rgb_matrix();
break;
}
default: {
*command_id = id_unhandled;
break;
}
}
}
#endif

View File

@ -114,6 +114,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE
#endif

View File

@ -1,19 +0,0 @@
/*
Copyright 2022 Terry Mathews
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -47,75 +47,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
_______, _______, _______, _______, _______, _______, _______, _______, _______
)
};
void via_qmk_rgblight_get_value(uint8_t *data) {
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch (*value_id) {
case id_qmk_rgblight_brightness: {
value_data[0] = rgb_matrix_get_val();
break;
}
case id_qmk_rgblight_effect: {
value_data[0] = rgb_matrix_get_flags() ? rgb_matrix_get_mode() : 0;
break;
}
case id_qmk_rgblight_effect_speed: {
value_data[0] = rgb_matrix_get_speed();
break;
}
case id_qmk_rgblight_color: {
value_data[0] = rgb_matrix_get_hue();
value_data[1] = rgb_matrix_get_sat();
break;
}
}
}
void via_qmk_rgblight_set_value(uint8_t *data) {
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch (*value_id) {
case id_qmk_rgblight_brightness: {
rgb_matrix_sethsv_noeeprom(rgblight_get_hue(), rgblight_get_sat(), value_data[0]);
break;
}
case id_qmk_rgblight_effect: {
if (value_data[0] == 0) {
rgb_matrix_set_flags(LED_FLAG_NONE);
} else {
rgb_matrix_mode_noeeprom(value_data[0]);
rgb_matrix_set_flags(LED_FLAG_MODIFIER|LED_FLAG_UNDERGLOW|LED_FLAG_KEYLIGHT);
}
break;
}
case id_qmk_rgblight_effect_speed: {
rgb_matrix_set_speed_noeeprom(value_data[0]);
break;
}
case id_qmk_rgblight_color: {
rgb_matrix_sethsv_noeeprom(value_data[0], value_data[1], rgblight_get_val());
break;
}
}
}
void raw_hid_receive_kb(uint8_t *data, uint8_t length) {
uint8_t *command_id = &(data[0]);
uint8_t *command_data = &(data[1]);
switch (*command_id) {
case id_lighting_set_value:
via_qmk_rgblight_set_value(command_data);
break;
case id_lighting_get_value:
via_qmk_rgblight_get_value(command_data);
break;
case id_lighting_save:
eeconfig_update_rgb_matrix();
break;
default:
// Unhandled message.
*command_id = id_unhandled;
break;
}
}

View File

@ -161,7 +161,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
# define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
# define VIA_CUSTOM_LIGHTING_ENABLE
#endif

View File

@ -108,6 +108,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -109,6 +109,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -103,6 +103,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 51
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -101,6 +101,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -108,6 +108,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -101,6 +101,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -101,6 +101,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -100,6 +100,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 43
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -143,6 +143,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 43
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -153,6 +153,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -0,0 +1,133 @@
// Copyright 2022 Jason Williams (@wilba)
// SPDX-License-Identifier: GPL-2.0-or-later
// This is a test harness for VIA custom UI.
//
// It handles channel IDs 0-7, value IDs 0-7.
//
// It's useful for testing custom UI on a PCB without compiling in
// features, especially features that will cause firmware to freeze
// if the PCB doesn't have support.
//
// To use:
// - add `SRC = keyboards/wilba_tech/via_test.c` to rules.mk
// - add `#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 128` to config.h
// (or change to match CHANNELS*VALUES*2)
#include "quantum.h"
#include "via.h"
#ifdef VIA_ENABLE
#define CHANNELS 8
#define VALUES 8
uint8_t g_value[CHANNELS][VALUES][2];
void values_init(void)
{
for ( uint8_t channel_id = 0; channel_id < CHANNELS; channel_id++ ) {
for ( uint8_t value_id = 0; value_id < VALUES; value_id++ ) {
g_value[channel_id][value_id][0] = 0x00;
g_value[channel_id][value_id][1] = 0x00;
}
}
}
void values_load(void)
{
eeprom_read_block( g_value, ((void*)VIA_EEPROM_CUSTOM_CONFIG_ADDR), VIA_EEPROM_CUSTOM_CONFIG_SIZE );
}
void values_save(void)
{
eeprom_update_block( g_value, ((void*)VIA_EEPROM_CUSTOM_CONFIG_ADDR), VIA_EEPROM_CUSTOM_CONFIG_SIZE );
}
// We do this to test if VIA is sending save commands per channel
// Not relevant for real situations
void values_save_on_channel(uint8_t channel_id)
{
uint16_t offset = channel_id * VALUES * 2;
eeprom_update_block( ((void*)g_value) + offset,
((void*)VIA_EEPROM_CUSTOM_CONFIG_ADDR) + offset,
VALUES * 2 );
}
void via_init_kb(void)
{
values_init();
// If the EEPROM has the magic, the data is good.
// OK to load from EEPROM
if (via_eeprom_is_valid()) {
values_load();
} else {
values_save();
// DO NOT set EEPROM valid here, let caller do this
}
}
void set_value( uint8_t channel_id, uint8_t *data )
{
// data = [ value_id, value_data ]
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
if ( *value_id >= 0 && *value_id < VALUES ) {
g_value[channel_id][*value_id][0] = value_data[0];
g_value[channel_id][*value_id][1] = value_data[1];
}
}
void get_value( uint8_t channel_id, uint8_t *data )
{
// data = [ value_id, value_data ]
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
if ( *value_id >= 0 && *value_id < VALUES ) {
value_data[0] = g_value[channel_id][*value_id][0];
value_data[1] = g_value[channel_id][*value_id][1];
}
}
void via_custom_value_command(uint8_t *data, uint8_t length) {
// data = [ command_id, channel_id, value_id, value_data ]
uint8_t *command_id = &(data[0]);
uint8_t *channel_id = &(data[1]);
uint8_t *value_id_and_data = &(data[2]);
if ( *channel_id >= 0 && *channel_id < CHANNELS ) {
switch ( *command_id )
{
case id_custom_set_value:
{
set_value(*channel_id,value_id_and_data);
break;
}
case id_custom_get_value:
{
get_value(*channel_id,value_id_and_data);
break;
}
case id_custom_save:
{
//for ( uint8_t i=0; i<CHANNELS; i++) {
values_save_on_channel(*channel_id);
//}
break;
}
default:
{
// Unhandled message.
*command_id = id_unhandled;
break;
}
}
return;
}
else {
*command_id = id_unhandled;
}
// DO NOT call raw_hid_send(data,length) here, let caller do this
}
#endif // VIA_ENABLE

View File

@ -121,6 +121,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -104,6 +104,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -104,6 +104,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -105,6 +105,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -26,6 +26,7 @@ float tone_numlk_on[][2] = SONG(NUM_LOCK_ON_SOUND);
float tone_numlk_off[][2] = SONG(NUM_LOCK_OFF_SOUND);
float tone_scroll_on[][2] = SONG(SCROLL_LOCK_ON_SOUND);
float tone_scroll_off[][2] = SONG(SCROLL_LOCK_OFF_SOUND);
float tone_device_indication[][2] = SONG(FANTASIE_IMPROMPTU);
#endif
@ -95,3 +96,9 @@ bool led_update_kb(led_t led_state) {
return true;
}
void via_set_device_indication(uint8_t value) {
if ( value == 0 ) {
PLAY_SONG(tone_device_indication);
}
}

View File

@ -121,6 +121,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -121,6 +121,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -121,6 +121,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -121,6 +121,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -121,6 +121,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -121,6 +121,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 7
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -132,36 +132,45 @@ void suspend_wakeup_init_kb(void)
// Moving this to the bottom of this source file is a workaround
// for an intermittent compiler error for Atmel compiler.
#ifdef VIA_ENABLE
void raw_hid_receive_kb(uint8_t *data, uint8_t length) {
uint8_t *command_id = &(data[0]);
uint8_t *command_data = &(data[1]);
switch ( *command_id )
{
void via_custom_value_command_kb(uint8_t *data, uint8_t length) {
uint8_t *command_id = &(data[0]);
uint8_t *channel_id = &(data[1]);
uint8_t *value_id_and_data = &(data[2]);
#if RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
case id_lighting_set_value:
if ( *channel_id == id_custom_channel ) {
switch ( *command_id )
{
backlight_config_set_value(command_data);
break;
}
case id_lighting_get_value:
{
backlight_config_get_value(command_data);
break;
}
case id_lighting_save:
{
backlight_config_save();
break;
}
#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
default:
{
// Unhandled message.
*command_id = id_unhandled;
*command_data = *command_data; // force use of variable
break;
case id_custom_set_value:
{
backlight_config_set_value(value_id_and_data);
break;
}
case id_custom_get_value:
{
backlight_config_get_value(value_id_and_data);
break;
}
case id_custom_save:
{
backlight_config_save();
break;
}
default:
{
// Unhandled message.
*command_id = id_unhandled;
break;
}
}
return;
}
#else
*command_id = id_unhandled;
*channel_id = *channel_id; // force use of variable
*value_id_and_data = *value_id_and_data; // force use of variable
#endif // RGB_BACKLIGHT_ENABLED || MONO_BACKLIGHT_ENABLED
// DO NOT call raw_hid_send(data,length) here, let caller do this
}
#endif // VIA_ENABLE

View File

@ -107,6 +107,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -107,6 +107,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -4,12 +4,3 @@
#pragma once
#define DYNAMIC_KEYMAP_LAYER_COUNT 8
// Enable a limited form of RGB Matrix support in VIA (requires redefining the
// effect list in the VIA JSON, which then becomes not 100% compatible with the
// RGBLIGHT firmwares).
#define VIA_QMK_RGBLIGHT_ENABLE
// Enable the workaround for the speed parameter mismatch between RGBLIGHT and
// RGB Matrix, so that the speed slider in VIA behaves in a more useful way.
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -164,60 +164,6 @@ uint8_t rgb_matrix_map_row_column_to_led_kb(uint8_t row, uint8_t column, uint8_t
return 0;
}
# if defined(VIA_ENABLE) && defined(VIA_CUSTOM_LIGHTING_ENABLE)
// VIA supports only 4 discrete values for effect speed; map these to some
// useful speed values for RGB Matrix.
enum speed_values {
RGBLIGHT_SPEED_0 = UINT8_MAX / 16, // not 0 to avoid really slow effects
RGBLIGHT_SPEED_1 = UINT8_MAX / 4,
RGBLIGHT_SPEED_2 = UINT8_MAX / 2, // matches the default value
RGBLIGHT_SPEED_3 = UINT8_MAX / 4 * 3, // UINT8_MAX is really fast
};
static uint8_t speed_from_rgblight(uint8_t rgblight_speed) {
switch (rgblight_speed) {
case 0:
return RGBLIGHT_SPEED_0;
case 1:
return RGBLIGHT_SPEED_1;
case 2:
default:
return RGBLIGHT_SPEED_2;
case 3:
return RGBLIGHT_SPEED_3;
}
}
static uint8_t speed_to_rgblight(uint8_t rgb_matrix_speed) {
if (rgb_matrix_speed < ((RGBLIGHT_SPEED_0 + RGBLIGHT_SPEED_1) / 2)) {
return 0;
} else if (rgb_matrix_speed < ((RGBLIGHT_SPEED_1 + RGBLIGHT_SPEED_2) / 2)) {
return 1;
} else if (rgb_matrix_speed < ((RGBLIGHT_SPEED_2 + RGBLIGHT_SPEED_3) / 2)) {
return 2;
} else {
return 3;
}
}
void raw_hid_receive_kb(uint8_t *data, uint8_t length) {
switch (data[0]) {
case id_lighting_get_value:
if (data[1] == id_qmk_rgblight_effect_speed) {
data[2] = speed_to_rgblight(rgb_matrix_get_speed());
}
break;
case id_lighting_set_value:
if (data[1] == id_qmk_rgblight_effect_speed) {
rgb_matrix_set_speed_noeeprom(speed_from_rgblight(data[2]));
}
break;
}
}
# endif // defined(VIA_ENABLE) && defined(VIA_CUSTOM_LIGHTING_ENABLE)
#endif // defined(RGB_MATRIX_ENABLE)
void winry315_set_orientation(uint8_t orientation) {

View File

@ -128,6 +128,3 @@
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 31
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE

View File

@ -1,20 +0,0 @@
/* Copyright 2021 Harrison Chan (Xelus)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
// Enable RGB Matrix
#define VIA_QMK_RGBLIGHT_ENABLE

View File

@ -18,6 +18,3 @@
// 3 layers or else it will not fit in EEPROM
#define DYNAMIC_KEYMAP_LAYER_COUNT 3
// Enable RGB Matrix
#define VIA_QMK_RGBLIGHT_ENABLE

View File

@ -15,8 +15,5 @@
*/
#pragma once
// RGB Matrix
#define VIA_QMK_RGBLIGHT_ENABLE
// More layers
#define DYNAMIC_KEYMAP_LAYER_COUNT 8

View File

@ -279,9 +279,8 @@ void dynamic_keymap_macro_send(uint8_t id) {
p = (void *)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR);
void *end = (void *)(DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR + DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE);
while (id > 0) {
// If we are past the end of the buffer, then the buffer
// contents are garbage, i.e. there were not DYNAMIC_KEYMAP_MACRO_COUNT
// nulls in the buffer.
// If we are past the end of the buffer, then there is
// no Nth macro in the buffer.
if (p == end) {
return;
}
@ -291,9 +290,8 @@ void dynamic_keymap_macro_send(uint8_t id) {
++p;
}
// Send the macro string one or three chars at a time
// by making temporary 1 or 3 char strings
char data[4] = {0, 0, 0, 0};
// Send the macro string by making a temporary string.
char data[8] = {0};
// We already checked there was a null at the end of
// the buffer, so this cannot go past the end
while (1) {
@ -303,14 +301,44 @@ void dynamic_keymap_macro_send(uint8_t id) {
if (data[0] == 0) {
break;
}
// If the char is magic (tap, down, up),
// add the next char (key to use) and send a 3 char string.
if (data[0] == SS_TAP_CODE || data[0] == SS_DOWN_CODE || data[0] == SS_UP_CODE) {
data[1] = data[0];
data[0] = SS_QMK_PREFIX;
data[2] = eeprom_read_byte(p++);
if (data[2] == 0) {
break;
if (data[0] == SS_QMK_PREFIX) {
// Get the code
data[1] = eeprom_read_byte(p++);
// Unexpected null, abort.
if (data[1] == 0) {
return;
}
if (data[1] == SS_TAP_CODE || data[1] == SS_DOWN_CODE || data[1] == SS_UP_CODE) {
// Get the keycode
data[2] = eeprom_read_byte(p++);
// Unexpected null, abort.
if (data[2] == 0) {
return;
}
// Null terminate
data[3] = 0;
} else if (data[1] == SS_DELAY_CODE) {
// Get the number and '|'
// At most this is 4 digits plus '|'
uint8_t i = 2;
while (1) {
data[i] = eeprom_read_byte(p++);
// Unexpected null, abort
if (data[i] == 0) {
return;
}
// Found '|', send it
if (data[i] == '|') {
data[i + 1] = 0;
break;
}
// If haven't found '|' by i==6 then
// number too big, abort
if (i == 6) {
return;
}
++i;
}
}
}
send_string_with_delay(data, DYNAMIC_KEYMAP_MACRO_DELAY);

View File

@ -54,6 +54,12 @@ void dynamic_keymap_set_buffer(uint16_t offset, uint16_t size, uint8_t *data);
// strings, the last byte must be a null when at maximum capacity,
// and it not being null means the buffer can be considered in an
// invalid state.
//
// The buffer *may* contain less macro strings than the maximum.
// This allows a higher maximum number of macros without requiring that
// number of nulls to be in the buffer.
// Note: dynamic_keymap_macro_get_count() returns the maximum that *can* be
// stored, not the current count of macros in the buffer.
uint8_t dynamic_keymap_macro_get_count(void);
uint16_t dynamic_keymap_macro_get_buffer_size(void);

View File

@ -22,26 +22,6 @@
# error "DYNAMIC_KEYMAP_ENABLE is not enabled"
#endif
// If VIA_CUSTOM_LIGHTING_ENABLE is not defined, then VIA_QMK_BACKLIGHT_ENABLE is set
// if BACKLIGHT_ENABLE is set, so handling of QMK Backlight values happens here by default.
// if VIA_CUSTOM_LIGHTING_ENABLE is defined, then VIA_QMK_BACKLIGHT_ENABLE must be explicitly
// set in keyboard-level config.h, so handling of QMK Backlight values happens here
#if defined(BACKLIGHT_ENABLE) && !defined(VIA_CUSTOM_LIGHTING_ENABLE)
# define VIA_QMK_BACKLIGHT_ENABLE
#endif
// If VIA_CUSTOM_LIGHTING_ENABLE is not defined, then VIA_QMK_RGBLIGHT_ENABLE is set
// if RGBLIGHT_ENABLE is set, so handling of QMK RGBLIGHT values happens here by default.
// If VIA_CUSTOM_LIGHTING_ENABLE is defined, then VIA_QMK_RGBLIGHT_ENABLE must be explicitly
// set in keyboard-level config.h, so handling of QMK RGBLIGHT values happens here
#if defined(RGBLIGHT_ENABLE) && !defined(VIA_CUSTOM_LIGHTING_ENABLE)
# define VIA_QMK_RGBLIGHT_ENABLE
#endif
#if defined(RGB_MATRIX_ENABLE) && !defined(VIA_QMK_RGBLIGHT_ENABLE) && !defined(VIA_CUSTOM_LIGHTING_ENABLE)
# define VIA_QMK_RGB_MATRIX_ENABLE
#endif
#include "quantum.h"
#include "via.h"
@ -51,22 +31,8 @@
#include "eeprom.h"
#include "version.h" // for QMK_BUILDDATE used in EEPROM magic
// Forward declare some helpers.
#if defined(VIA_QMK_BACKLIGHT_ENABLE)
void via_qmk_backlight_set_value(uint8_t *data);
void via_qmk_backlight_get_value(uint8_t *data);
#endif
#if defined(VIA_QMK_RGBLIGHT_ENABLE)
void via_qmk_rgblight_set_value(uint8_t *data);
void via_qmk_rgblight_get_value(uint8_t *data);
#endif
#if defined(VIA_QMK_RGB_MATRIX_ENABLE)
#if defined(RGB_MATRIX_ENABLE)
# include <lib/lib8tion/lib8tion.h>
void via_qmk_rgb_matrix_set_value(uint8_t *data);
void via_qmk_rgb_matrix_get_value(uint8_t *data);
void eeconfig_update_rgb_matrix(void);
#endif
// Can be called in an overriding via_init_kb() to test if keyboard level code usage of
@ -155,6 +121,34 @@ void via_set_layout_options(uint32_t value) {
}
}
#if defined(AUDIO_ENABLE)
float via_device_indication_song[][2] = SONG(STARTUP_SOUND);
#endif // AUDIO_ENABLE
// Used by VIA to tell a device to flash LEDs (or do something else) when that
// device becomes the active device being configured, on startup or switching
// between devices. This function will be called six times, at 200ms interval,
// with an incrementing value starting at zero. Since this function is called
// an even number of times, it can call a toggle function and leave things in
// the original state.
__attribute__((weak)) void via_set_device_indication(uint8_t value) {
#if defined(BACKLIGHT_ENABLE)
backlight_toggle();
#endif // BACKLIGHT_ENABLE
#if defined(RGBLIGHT_ENABLE)
rgblight_toggle_noeeprom();
#endif // RGBLIGHT_ENABLE
#if defined(RGB_MATRIX_ENABLE)
rgb_matrix_toggle_noeeprom();
#endif // RGB_MATRIX_ENABLE
#if defined(AUDIO_ENABLE)
if (value == 0) {
wait_ms(10);
PLAY_SONG(via_device_indication_song);
}
#endif // AUDIO_ENABLE
}
// Called by QMK core to process VIA-specific keycodes.
bool process_record_via(uint16_t keycode, keyrecord_t *record) {
// Handle macros
@ -194,24 +188,96 @@ bool process_record_via(uint16_t keycode, keyrecord_t *record) {
return true;
}
// Keyboard level code can override this to handle custom messages from VIA.
// See raw_hid_receive() implementation.
//
// via_custom_value_command() has the default handling of custom values for Core modules.
// If a keyboard is using the default Core modules, it does not need to be overridden,
// the VIA keyboard definition will have matching channel/IDs.
//
// If a keyboard has some extra custom values, then via_custom_value_command_kb() can be
// overridden to handle the extra custom values, leaving via_custom_value_command() to
// handle the custom values for Core modules.
//
// If a keyboard has custom values and code that are overlapping with Core modules,
// then via_custom_value_command() can be overridden and call the same functions
// as the default implementation, or do whatever else is required.
//
// DO NOT call raw_hid_send() in the override function.
__attribute__((weak)) void raw_hid_receive_kb(uint8_t *data, uint8_t length) {
//
// This is the default handler for "extra" custom values, i.e. keyboard-specific custom values
// that are not handled by via_custom_value_command().
__attribute__((weak)) void via_custom_value_command_kb(uint8_t *data, uint8_t length) {
// data = [ command_id, channel_id, value_id, value_data ]
uint8_t *command_id = &(data[0]);
*command_id = id_unhandled;
// Return the unhandled state
*command_id = id_unhandled;
}
// VIA handles received HID messages first, and will route to
// raw_hid_receive_kb() for command IDs that are not handled here.
// This gives the keyboard code level the ability to handle the command
// specifically.
// This is the default handler for custom value commands.
// It routes commands with channel IDs to command handlers as such:
//
// raw_hid_send() is called at the end, with the same buffer, which was
// possibly modified with returned values.
// id_qmk_backlight_channel -> via_qmk_backlight_command()
// id_qmk_rgblight_channel -> via_qmk_rgblight_command()
// id_qmk_rgb_matrix_channel -> via_qmk_rgb_matrix_command()
// id_qmk_audio_channel -> via_qmk_audio_command()
//
__attribute__((weak)) void via_custom_value_command(uint8_t *data, uint8_t length) {
// data = [ command_id, channel_id, value_id, value_data ]
uint8_t *channel_id = &(data[1]);
#if defined(BACKLIGHT_ENABLE)
if (*channel_id == id_qmk_backlight_channel) {
via_qmk_backlight_command(data, length);
return;
}
#endif // BACKLIGHT_ENABLE
#if defined(RGBLIGHT_ENABLE)
if (*channel_id == id_qmk_rgblight_channel) {
via_qmk_rgblight_command(data, length);
return;
}
#endif // RGBLIGHT_ENABLE
#if defined(RGB_MATRIX_ENABLE)
if (*channel_id == id_qmk_rgb_matrix_channel) {
via_qmk_rgb_matrix_command(data, length);
return;
}
#endif // RGBLIGHT_ENABLE
#if defined(AUDIO_ENABLE)
if (*channel_id == id_qmk_audio_channel) {
via_qmk_audio_command(data, length);
return;
}
#endif // AUDIO_ENABLE
(void)channel_id; // force use of variable
// If we haven't returned before here, then let the keyboard level code
// handle this, if it is overridden, otherwise by default, this will
// return the unhandled state.
via_custom_value_command_kb(data, length);
}
// Keyboard level code can override this, but shouldn't need to.
// Controlling custom features should be done by overriding
// via_custom_value_command_kb() instead.
__attribute__((weak)) bool via_command_kb(uint8_t *data, uint8_t length) {
return false;
}
void raw_hid_receive(uint8_t *data, uint8_t length) {
uint8_t *command_id = &(data[0]);
uint8_t *command_data = &(data[1]);
// If via_command_kb() returns true, the command was fully
// handled, including calling raw_hid_send()
if (via_command_kb(data, length)) {
return;
}
switch (*command_id) {
case id_get_protocol_version: {
command_data[0] = VIA_PROTOCOL_VERSION >> 8;
@ -237,7 +303,10 @@ void raw_hid_receive(uint8_t *data, uint8_t length) {
break;
}
case id_switch_matrix_state: {
#if ((MATRIX_COLS / 8 + 1) * MATRIX_ROWS <= 28)
// Round up to the nearest number of bytes required to hold row state.
// Multiply by number of rows to get the required size in bytes.
// Guard against this being too big for the HID message.
#if (((MATRIX_COLS + 7) / 8) * MATRIX_ROWS <= 28)
uint8_t i = 1;
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
matrix_row_t value = matrix_get_row(row);
@ -255,8 +324,18 @@ void raw_hid_receive(uint8_t *data, uint8_t length) {
#endif
break;
}
case id_firmware_version: {
uint32_t value = VIA_FIRMWARE_VERSION;
command_data[1] = (value >> 24) & 0xFF;
command_data[2] = (value >> 16) & 0xFF;
command_data[3] = (value >> 8) & 0xFF;
command_data[4] = value & 0xFF;
break;
}
default: {
raw_hid_receive_kb(data, length);
// The value ID is not known
// Return the unhandled state
*command_id = id_unhandled;
break;
}
}
@ -269,8 +348,15 @@ void raw_hid_receive(uint8_t *data, uint8_t length) {
via_set_layout_options(value);
break;
}
case id_device_indication: {
uint8_t value = command_data[1];
via_set_device_indication(value);
break;
}
default: {
raw_hid_receive_kb(data, length);
// The value ID is not known
// Return the unhandled state
*command_id = id_unhandled;
break;
}
}
@ -290,61 +376,10 @@ void raw_hid_receive(uint8_t *data, uint8_t length) {
dynamic_keymap_reset();
break;
}
case id_lighting_set_value: {
#if defined(VIA_QMK_BACKLIGHT_ENABLE)
via_qmk_backlight_set_value(command_data);
#endif
#if defined(VIA_QMK_RGBLIGHT_ENABLE)
via_qmk_rgblight_set_value(command_data);
#endif
#if defined(VIA_QMK_RGB_MATRIX_ENABLE)
via_qmk_rgb_matrix_set_value(command_data);
#endif
#if defined(VIA_CUSTOM_LIGHTING_ENABLE)
raw_hid_receive_kb(data, length);
#endif
#if !defined(VIA_QMK_BACKLIGHT_ENABLE) && !defined(VIA_QMK_RGBLIGHT_ENABLE) && !defined(VIA_CUSTOM_LIGHTING_ENABLE) && !defined(VIA_QMK_RGB_MATRIX_ENABLE)
// Return the unhandled state
*command_id = id_unhandled;
#endif
break;
}
case id_lighting_get_value: {
#if defined(VIA_QMK_BACKLIGHT_ENABLE)
via_qmk_backlight_get_value(command_data);
#endif
#if defined(VIA_QMK_RGBLIGHT_ENABLE)
via_qmk_rgblight_get_value(command_data);
#endif
#if defined(VIA_QMK_RGB_MATRIX_ENABLE)
via_qmk_rgb_matrix_get_value(command_data);
#endif
#if defined(VIA_CUSTOM_LIGHTING_ENABLE)
raw_hid_receive_kb(data, length);
#endif
#if !defined(VIA_QMK_BACKLIGHT_ENABLE) && !defined(VIA_QMK_RGBLIGHT_ENABLE) && !defined(VIA_CUSTOM_LIGHTING_ENABLE) && !defined(VIA_QMK_RGB_MATRIX_ENABLE)
// Return the unhandled state
*command_id = id_unhandled;
#endif
break;
}
case id_lighting_save: {
#if defined(VIA_QMK_BACKLIGHT_ENABLE)
eeconfig_update_backlight_current();
#endif
#if defined(VIA_QMK_RGBLIGHT_ENABLE)
eeconfig_update_rgblight_current();
#endif
#if defined(VIA_QMK_RGB_MATRIX_ENABLE)
eeconfig_update_rgb_matrix();
#endif
#if defined(VIA_CUSTOM_LIGHTING_ENABLE)
raw_hid_receive_kb(data, length);
#endif
#if !defined(VIA_QMK_BACKLIGHT_ENABLE) && !defined(VIA_QMK_RGBLIGHT_ENABLE) && !defined(VIA_CUSTOM_LIGHTING_ENABLE) && !defined(VIA_QMK_RGB_MATRIX_ENABLE)
// Return the unhandled state
*command_id = id_unhandled;
#endif
case id_custom_set_value:
case id_custom_get_value:
case id_custom_save: {
via_custom_value_command(data, length);
break;
}
#ifdef VIA_EEPROM_ALLOW_RESET
@ -421,13 +456,39 @@ void raw_hid_receive(uint8_t *data, uint8_t length) {
raw_hid_send(data, length);
}
#if defined(VIA_QMK_BACKLIGHT_ENABLE)
#if defined(BACKLIGHT_ENABLE)
void via_qmk_backlight_command(uint8_t *data, uint8_t length) {
// data = [ command_id, channel_id, value_id, value_data ]
uint8_t *command_id = &(data[0]);
uint8_t *value_id_and_data = &(data[2]);
switch (*command_id) {
case id_custom_set_value: {
via_qmk_backlight_set_value(value_id_and_data);
break;
}
case id_custom_get_value: {
via_qmk_backlight_get_value(value_id_and_data);
break;
}
case id_custom_save: {
via_qmk_backlight_save();
break;
}
default: {
*command_id = id_unhandled;
break;
}
}
}
# if BACKLIGHT_LEVELS == 0
# error BACKLIGHT_LEVELS == 0
# endif
void via_qmk_backlight_get_value(uint8_t *data) {
// data = [ value_id, value_data ]
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch (*value_id) {
@ -448,6 +509,7 @@ void via_qmk_backlight_get_value(uint8_t *data) {
}
void via_qmk_backlight_set_value(uint8_t *data) {
// data = [ value_id, value_data ]
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch (*value_id) {
@ -469,14 +531,44 @@ void via_qmk_backlight_set_value(uint8_t *data) {
}
}
#endif // #if defined(VIA_QMK_BACKLIGHT_ENABLE)
void via_qmk_backlight_save(void) {
eeconfig_update_backlight_current();
}
#if defined(VIA_QMK_RGBLIGHT_ENABLE)
#endif // BACKLIGHT_ENABLE
#if defined(RGBLIGHT_ENABLE)
# ifndef RGBLIGHT_LIMIT_VAL
# define RGBLIGHT_LIMIT_VAL 255
# endif
void via_qmk_rgblight_command(uint8_t *data, uint8_t length) {
// data = [ command_id, channel_id, value_id, value_data ]
uint8_t *command_id = &(data[0]);
uint8_t *value_id_and_data = &(data[2]);
switch (*command_id) {
case id_custom_set_value: {
via_qmk_rgblight_set_value(value_id_and_data);
break;
}
case id_custom_get_value: {
via_qmk_rgblight_get_value(value_id_and_data);
break;
}
case id_custom_save: {
via_qmk_rgblight_save();
break;
}
default: {
*command_id = id_unhandled;
break;
}
}
}
void via_qmk_rgblight_get_value(uint8_t *data) {
// data = [ value_id, value_data ]
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch (*value_id) {
@ -485,7 +577,7 @@ void via_qmk_rgblight_get_value(uint8_t *data) {
break;
}
case id_qmk_rgblight_effect: {
value_data[0] = rgblight_get_mode();
value_data[0] = rgblight_is_enabled() ? rgblight_get_mode() : 0;
break;
}
case id_qmk_rgblight_effect_speed: {
@ -501,6 +593,7 @@ void via_qmk_rgblight_get_value(uint8_t *data) {
}
void via_qmk_rgblight_set_value(uint8_t *data) {
// data = [ value_id, value_data ]
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch (*value_id) {
@ -509,11 +602,11 @@ void via_qmk_rgblight_set_value(uint8_t *data) {
break;
}
case id_qmk_rgblight_effect: {
rgblight_mode_noeeprom(value_data[0]);
if (value_data[0] == 0) {
rgblight_disable_noeeprom();
} else {
rgblight_enable_noeeprom();
rgblight_mode_noeeprom(value_data[0]);
}
break;
}
@ -528,92 +621,168 @@ void via_qmk_rgblight_set_value(uint8_t *data) {
}
}
#endif // #if defined(VIA_QMK_RGBLIGHT_ENABLE)
void via_qmk_rgblight_save(void) {
eeconfig_update_rgblight_current();
}
#if defined(VIA_QMK_RGB_MATRIX_ENABLE)
#endif // QMK_RGBLIGHT_ENABLE
#if defined(RGB_MATRIX_ENABLE)
# if !defined(RGB_MATRIX_MAXIMUM_BRIGHTNESS) || RGB_MATRIX_MAXIMUM_BRIGHTNESS > UINT8_MAX
# undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS UINT8_MAX
# endif
// VIA supports only 4 discrete values for effect speed; map these to some
// useful speed values for RGB Matrix.
enum speed_values {
RGBLIGHT_SPEED_0 = UINT8_MAX / 16, // not 0 to avoid really slow effects
RGBLIGHT_SPEED_1 = UINT8_MAX / 4,
RGBLIGHT_SPEED_2 = UINT8_MAX / 2, // matches the default value
RGBLIGHT_SPEED_3 = UINT8_MAX / 4 * 3, // UINT8_MAX is really fast
};
void via_qmk_rgb_matrix_command(uint8_t *data, uint8_t length) {
// data = [ command_id, channel_id, value_id, value_data ]
uint8_t *command_id = &(data[0]);
uint8_t *value_id_and_data = &(data[2]);
static uint8_t speed_from_rgblight(uint8_t rgblight_speed) {
switch (rgblight_speed) {
case 0:
return RGBLIGHT_SPEED_0;
case 1:
return RGBLIGHT_SPEED_1;
case 2:
default:
return RGBLIGHT_SPEED_2;
case 3:
return RGBLIGHT_SPEED_3;
}
}
static uint8_t speed_to_rgblight(uint8_t rgb_matrix_speed) {
if (rgb_matrix_speed < ((RGBLIGHT_SPEED_0 + RGBLIGHT_SPEED_1) / 2)) {
return 0;
} else if (rgb_matrix_speed < ((RGBLIGHT_SPEED_1 + RGBLIGHT_SPEED_2) / 2)) {
return 1;
} else if (rgb_matrix_speed < ((RGBLIGHT_SPEED_2 + RGBLIGHT_SPEED_3) / 2)) {
return 2;
} else {
return 3;
switch (*command_id) {
case id_custom_set_value: {
via_qmk_rgb_matrix_set_value(value_id_and_data);
break;
}
case id_custom_get_value: {
via_qmk_rgb_matrix_get_value(value_id_and_data);
break;
}
case id_custom_save: {
via_qmk_rgb_matrix_save();
break;
}
default: {
*command_id = id_unhandled;
break;
}
}
}
void via_qmk_rgb_matrix_get_value(uint8_t *data) {
// data = [ value_id, value_data ]
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch (*value_id) {
case id_qmk_rgblight_brightness:
case id_qmk_rgb_matrix_brightness: {
value_data[0] = ((uint16_t)rgb_matrix_get_val() * UINT8_MAX) / RGB_MATRIX_MAXIMUM_BRIGHTNESS;
break;
case id_qmk_rgblight_effect:
value_data[0] = rgb_matrix_get_mode();
}
case id_qmk_rgb_matrix_effect: {
value_data[0] = rgb_matrix_is_enabled() ? rgb_matrix_get_mode() : 0;
break;
case id_qmk_rgblight_effect_speed:
value_data[0] = speed_to_rgblight(rgb_matrix_get_speed());
}
case id_qmk_rgb_matrix_effect_speed: {
value_data[0] = rgb_matrix_get_speed();
break;
case id_qmk_rgblight_color:
}
case id_qmk_rgb_matrix_color: {
value_data[0] = rgb_matrix_get_hue();
value_data[1] = rgb_matrix_get_sat();
break;
}
}
}
void via_qmk_rgb_matrix_set_value(uint8_t *data) {
// data = [ value_id, value_data ]
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch (*value_id) {
case id_qmk_rgblight_brightness:
case id_qmk_rgb_matrix_brightness: {
rgb_matrix_sethsv_noeeprom(rgb_matrix_get_hue(), rgb_matrix_get_sat(), scale8(value_data[0], RGB_MATRIX_MAXIMUM_BRIGHTNESS));
break;
case id_qmk_rgblight_effect:
rgb_matrix_mode_noeeprom(value_data[0]);
}
case id_qmk_rgb_matrix_effect: {
if (value_data[0] == 0) {
rgb_matrix_disable_noeeprom();
} else {
rgb_matrix_enable_noeeprom();
rgb_matrix_mode_noeeprom(value_data[0]);
}
break;
case id_qmk_rgblight_effect_speed:
rgb_matrix_set_speed_noeeprom(speed_from_rgblight(value_data[0]));
}
case id_qmk_rgb_matrix_effect_speed: {
rgblight_set_speed_noeeprom(value_data[0]);
break;
case id_qmk_rgblight_color:
rgb_matrix_sethsv_noeeprom(value_data[0], value_data[1], rgb_matrix_get_val());
}
case id_qmk_rgb_matrix_color: {
rgblight_sethsv_noeeprom(value_data[0], value_data[1], rgb_matrix_get_val());
break;
}
}
}
#endif // #if defined(VIA_QMK_RGB_MATRIX_ENABLE)
void via_qmk_rgb_matrix_save(void) {
eeconfig_update_rgb_matrix();
}
#endif // RGB_MATRIX_ENABLE
#if defined(AUDIO_ENABLE)
extern audio_config_t audio_config;
void via_qmk_audio_command(uint8_t *data, uint8_t length) {
// data = [ command_id, channel_id, value_id, value_data ]
uint8_t *command_id = &(data[0]);
uint8_t *value_id_and_data = &(data[2]);
switch (*command_id) {
case id_custom_set_value: {
via_qmk_audio_set_value(value_id_and_data);
break;
}
case id_custom_get_value: {
via_qmk_audio_get_value(value_id_and_data);
break;
}
case id_custom_save: {
via_qmk_audio_save();
break;
}
default: {
*command_id = id_unhandled;
break;
}
}
}
void via_qmk_audio_get_value(uint8_t *data) {
// data = [ value_id, value_data ]
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch (*value_id) {
case id_qmk_audio_enable: {
value_data[0] = audio_config.enable ? 1 : 0;
break;
}
case id_qmk_audio_clicky_enable: {
value_data[0] = audio_config.clicky_enable ? 1 : 0;
break;
}
}
}
void via_qmk_audio_set_value(uint8_t *data) {
// data = [ value_id, value_data ]
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch (*value_id) {
case id_qmk_audio_enable: {
audio_config.enable = value_data[0] ? 1 : 0;
break;
}
case id_qmk_audio_clicky_enable: {
audio_config.clicky_enable = value_data[0] ? 1 : 0;
break;
}
}
}
void via_qmk_audio_save(void) {
eeconfig_update_audio(audio_config.raw);
}
#endif // QMK_AUDIO_ENABLE

View File

@ -60,6 +60,16 @@
// so VIA Configurator can detect compatible firmware.
#define VIA_PROTOCOL_VERSION 0x000B
// This is a version number for the firmware for the keyboard.
// It can be used to ensure the VIA keyboard definition and the firmware
// have the same version, especially if there are changes to custom values.
// Define this in config.h to override and bump this number.
// This is *not* required if the keyboard is only using basic functionality
// and not using custom values for lighting, rotary encoders, etc.
#ifndef VIA_FIRMWARE_VERSION
# define VIA_FIRMWARE_VERSION 0x00000000
#endif
enum via_command_id {
id_get_protocol_version = 0x01, // always 0x01
id_get_keyboard_value = 0x02,
@ -67,9 +77,9 @@ enum via_command_id {
id_dynamic_keymap_get_keycode = 0x04,
id_dynamic_keymap_set_keycode = 0x05,
id_dynamic_keymap_reset = 0x06,
id_lighting_set_value = 0x07,
id_lighting_get_value = 0x08,
id_lighting_save = 0x09,
id_custom_set_value = 0x07,
id_custom_get_value = 0x08,
id_custom_save = 0x09,
id_eeprom_reset = 0x0A,
id_bootloader_jump = 0x0B,
id_dynamic_keymap_macro_get_count = 0x0C,
@ -86,21 +96,43 @@ enum via_command_id {
};
enum via_keyboard_value_id {
id_uptime = 0x01, //
id_uptime = 0x01,
id_layout_options = 0x02,
id_switch_matrix_state = 0x03
id_switch_matrix_state = 0x03,
id_firmware_version = 0x04,
id_device_indication = 0x05,
};
enum via_lighting_value {
// QMK BACKLIGHT
id_qmk_backlight_brightness = 0x09,
id_qmk_backlight_effect = 0x0A,
enum via_channel_id {
id_custom_channel = 0,
id_qmk_backlight_channel = 1,
id_qmk_rgblight_channel = 2,
id_qmk_rgb_matrix_channel = 3,
id_qmk_audio_channel = 4,
};
// QMK RGBLIGHT
id_qmk_rgblight_brightness = 0x80,
id_qmk_rgblight_effect = 0x81,
id_qmk_rgblight_effect_speed = 0x82,
id_qmk_rgblight_color = 0x83,
enum via_qmk_backlight_value {
id_qmk_backlight_brightness = 1,
id_qmk_backlight_effect = 2,
};
enum via_qmk_rgblight_value {
id_qmk_rgblight_brightness = 1,
id_qmk_rgblight_effect = 2,
id_qmk_rgblight_effect_speed = 3,
id_qmk_rgblight_color = 4,
};
enum via_qmk_rgb_matrix_value {
id_qmk_rgb_matrix_brightness = 1,
id_qmk_rgb_matrix_effect = 2,
id_qmk_rgb_matrix_effect_speed = 3,
id_qmk_rgb_matrix_color = 4,
};
enum via_qmk_audio_value {
id_qmk_audio_enable = 1,
id_qmk_audio_clicky_enable = 2,
};
enum via_keycodes {
@ -160,5 +192,39 @@ uint32_t via_get_layout_options(void);
void via_set_layout_options(uint32_t value);
void via_set_layout_options_kb(uint32_t value);
// Used by VIA to tell a device to flash LEDs (or do something else) when that
// device becomes the active device being configured, on startup or switching
// between devices.
void via_set_device_indication(uint8_t value);
// Called by QMK core to process VIA-specific keycodes.
bool process_record_via(uint16_t keycode, keyrecord_t *record);
// These are made external so that keyboard level custom value handlers can use them.
#if defined(BACKLIGHT_ENABLE)
void via_qmk_backlight_command(uint8_t *data, uint8_t length);
void via_qmk_backlight_set_value(uint8_t *data);
void via_qmk_backlight_get_value(uint8_t *data);
void via_qmk_backlight_save(void);
#endif
#if defined(RGBLIGHT_ENABLE)
void via_qmk_rgblight_command(uint8_t *data, uint8_t length);
void via_qmk_rgblight_set_value(uint8_t *data);
void via_qmk_rgblight_get_value(uint8_t *data);
void via_qmk_rgblight_save(void);
#endif
#if defined(RGB_MATRIX_ENABLE)
void via_qmk_rgb_matrix_command(uint8_t *data, uint8_t length);
void via_qmk_rgb_matrix_set_value(uint8_t *data);
void via_qmk_rgb_matrix_get_value(uint8_t *data);
void via_qmk_rgb_matrix_save(void);
#endif
#if defined(AUDIO_ENABLE)
void via_qmk_audio_command(uint8_t *data, uint8_t length);
void via_qmk_audio_set_value(uint8_t *data);
void via_qmk_audio_get_value(uint8_t *data);
void via_qmk_audio_save(void);
#endif