Commit Graph

10 Commits

Author SHA1 Message Date
Takeshi ISHII a91f439aec Helix-serial.c configuration improvement (#4370)
The new simple API can be selected.

Previous version, can select two way.
  * use old API (compatible with let's split serial.c)
  * use new API (multi-type transaction)

This version, can select three way.
  * use old API (compatible with let's split serial.c)
  * use new API (single-type transaction)
  * use new API (multi-type transaction)

There is no change in the code generated by this change.
2018-11-06 12:02:30 -08:00
mtei 9315172190 helix serial.c: Add the version of gcc used for adjustment to the comment. 2018-10-29 22:25:48 -07:00
mtei d63fb6f716 helix serial.c: add some comment 2018-10-28 10:39:08 -07:00
Takeshi ISHII 8517f8a660 Helix serial.c re-adjust compiler depend value of delay (#4269)
* Helix serial.c add debug code

* re-adjust READ_WRITE_WIDTH_ADJUST values

* re-adjust READ_WRITE_START_ADJUST values

* re-adjust TID_SEND_ADJUST value

* Helix serial.c: remove debug code
2018-10-28 10:12:44 -07:00
Takeshi ISHII 4665e4ffff Keyboard: Helix serial.c, split_scom.c bug fix and update (#4191)
* helix/serial.c add support PD1,PD3,PE6 and configuration simplify

* Add comment about ATmega32U4 I2C

* Add compile time check for ATmega32U4 I2C

* change TAB code to 8 SPACE code

* Helix serial.c PORTD,PD0 test. OK

  OK PD0
  -  PD1
  OK PD2
  -  PD3
  -  PE6

* Helix serial.c PORTD,PD1 test. OK

   OK PD0
   OK PD1
   OK PD2
   -  PD3
   -  PE6

* Helix serial.c PORTD,PD3 test. OK

   OK PD0
   OK PD1
   OK PD2
   OK PD3
   -  PE6

* Helix serial.c PORTE,PD6 test. OK

   OK PD0
   OK PD1
   OK PD2
   OK PD3
   OK PE6

* Helix serial.c: PD0,PD1,PD3,PE6 all test end

* Helix serial.c: rename SOFT_SERIAL_PORT to SOFT_SERIAL_PIN

* Helix serial.c add debug code

* Helix serial.c: add transaction ID range check

* Helix serial.c debug code update

* Helix serial.c debug code update

* Helix serial.c: Strict checking of the value of tid.

* adjust the delay of serial.c

* Helix serial.c: remove debug code

* remove EXTRAFLAGS += -DCONSOLE_ENABLE from five_rows/rules.mk

tmk_core/common.mk has
 >ifeq ($(strip $(CONSOLE_ENABLE)), yes)
 >   TMK_COMMON_DEFS += -DCONSOLE_ENABLE

* Fix error handling in split_scomm.c

* add some comment to serial.c

* add some comment about SELECT_SOFT_SERIAL_SPEED
2018-10-22 11:38:05 -07:00
MakotoKurauchi feb5e4aaeb Keyboard: Helix serial improvements (#3608)
* add change_reciver2sender()/change_sender2reciver()

This is a change to improve readability.

* txled, rxled off in matrix_init()

* add serial_send_packet() / serial_recive_packet()

This is a change to reduce object size.

* add serial_low() at ISR() top

* add __attribute__((always_inline)) to some functions

* modify serial_send_packet()/serial_recive_packet()

A little, object size reduction.
A little, speedup.

* add debug code to helix/serial.c

* Adjust sampling timing of serial signal being received

* add split_scomm.c/split_scomm.h and change serial.c/serial.h

serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.

* add split_scomm.c/split_scomm.h into helix/rev1

* reduce object size helix/rev2/matrix.c

* remove checksum check, add parity check

* force occur parity error for test

* parity test ok. remove test code

* change some comment & add skip code when buffer_size == 0

* serial.c: multiple types of transaction support

Add 4 bits transaction-type field at packet top.
Select Transaction Descriptor Table entry by transaction-type.

* helix serial master-slave transaction optimize

Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized.

* add debug code for retry

* add comment into each config.h

* fix ISR status drop

* add a debug macro 'debug_retry_chg()'

* reduce led_test size

* remove debug code from helix/serial.c and etc.

* helix:five_rows change TAPPING_TERM value 140

* Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement.

- The difference with the original let's split's serial.c
  - It's high-speed about 4 times.
  - Stable bi-directional data transfer. (Helix need master to slave transfer)
  - serial.h was divided 2 files, serial_config.h and sereial.h
  - With multiple types of transaction support, communication contents can be optimized. (NEW flexible API)

- USE OLD Simple APIs (compatible with let's split serial.c)
  - files :
    - serial_config.h -- hardware configuration (need include by config.h)
    - serial.c/serial.h -- serial communication

- USE NEW flexible APIs. (Support multi-type transaction function.)
  serial.c was divided into 2 layers, split_scom.c and serial.c.
  The upper layer split_scomm.c is called from matrix.c.
  The lower layer serial.c accesses the hardware.
  - files
    - split_scomm.c -- communication buffer is defined in here. call by matrix.c.
    - split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c
    - serial_config.h -- hardware configuration (need include by config.h)
      To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION
    - serial.c/serial.h -- serial communication lower layer

- NEW APIs for serial.c / serial.h (The lower layer)
  // Soft Serial Transaction Descriptor
  typedef struct _SSTD_t  {
      uint8_t *status;
      uint8_t initiator2target_buffer_size;
      uint8_t *initiator2target_buffer;
      uint8_t target2initiator_buffer_size;
      uint8_t *target2initiator_buffer;
  } SSTD_t;

  // initiator is transaction start side
  void soft_serial_initiator_init(SSTD_t *sstd_table);
  // target is interrupt accept side
  void soft_serial_target_init(SSTD_t *sstd_table);
  int soft_serial_transaction(int sstd_index);
  int soft_serial_get_and_clean_target_status(int sstd_index);

- NEW APIs for split_scomm.c / split_scomm.h (The upper layer)
   move from old serial.c the following buffer and functions
     serial_slave_buffer[]
     serial_master_buffer[]
     void serial_master_init(void)
     void serial_slave_init(void)
     int serial_update_buffers(void)
   define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h
2018-08-10 08:22:09 -07:00
MakotoKurauchi f30d6dd785 Helix config refine (#3374)
* helix config.h refine
2018-07-12 10:23:30 -07:00
MakotoKurauchi 1038bbef40 Helix serial bugfix (#3255)
* add helix serial debug code

* serial debug macro move from config.h to serial.h

* helix serial.c debugging...

* refine debug macros

* add some comments

* add SELECT_SERIAL_SPEED

* add comments

* debugging sync_send/sync_recv

* add very high speed

* fix sync_send/sync_recv

* fix com. start and switch send/recv

* debug mode off

* remove debug codes
2018-06-28 06:55:15 -07:00
MakotoKurauchi 7498b184b7 Support ios to default keymap (#3118)
* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL

* add define USB_MAX_POWER_CONSUMPTION

* Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk

rules.mk: add 4 Variables for compile control.

   # Helix keyboard customize
   # you can edit follows 4 Variables
   #  jp: 以下の4つの変数を必要に応じて編集します。
   OLED_ENABLE = no            # OLED_ENABLE
   LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
   LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
   LED_ANIMATIONS = yes        # LED animations

config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define

* HELIX_ROWS define move from config.h to rules.mk

* add readme.md

* rename readme.md to readme_jp.md

* add readme.md and modify readme_jp.md

* change helix/ssd1306.c for select glcdfont.c position

* add variable LOCAL_GLCDFONT into each keymaps rules.mk

* Add iPhone/iPad LED support to Helix default keymap

* add Freggy keymap

* adjust the delay of serial.c

* change readme

* renumber _ADJUST for shrink program size
2018-06-04 08:14:35 -07:00
MakotoKurauchi bceffdefca Add helix keyboard (#2308)
* Fork from Let's Split

* Organizing files

* Delete some keymaps

* I2C and serial enabled at the same time

* Change readme

* add #define HELIX_ROWS for multiple rows

* Delete avrdude flashing script

* Delete makefiles

* Subproject elimination

* Fix lufa path

* Remove PLAY_NOTE_ARRAY usages to get rid of warning.

Fix conflicting function name

* Mousekey change default to off

* Fix to oled display adjust

* make rev2

change pin assign
change keymap

* use master_buffer

* Timing adjustment

* Organizing files

* Change Keymap

* Change Keymap

Add EISU and KANA
Correct 4rows

* NKRO default to disable

* EXTRAKEY_ENABLE default to disable

* add rgb reset key

* rgb custom function enable

*  Extend font

* add RGBLED_POWER

default folder to helix/rev2
RGB_ENABLE to no

* renamed directory

* Disable RGBLIGHT_CUSTOM_DRIVER

* Disable LOCKING_SUPPORT_ENABLE

* Update bootloader setting

* Change readme

* Fixed argument error
2018-01-28 12:14:12 -05:00