qmk_firmware/keyboards/kindakeyboards/conone65
James Young 030d503d35
Migrate `LOCKING_*_ENABLE` to Data-Driven: K, Part 3 (#23770)
Affects:

  - `kindakeyboards/conone65`
  - `kinesis`
  - `kingly_keys/ave/ortho`
  - `kingly_keys/ave/staggered`
  - `kingly_keys/little_foot`
  - `kingly_keys/romac`
  - `kingly_keys/romac_plus`
  - `kingly_keys/ropro`
  - `kingly_keys/smd_milk`
  - `kingly_keys/soap`
  - `kira/kira75`
  - `kisakeyluxury/qtz`
  - `kiserdesigns/madeline`
  - `kiwikeebs/macro`
  - `kiwikeebs/macro_v2`
  - `kiwikey/borderland`
  - `kiwikey/kawii9`
  - `kiwikey/wanderland`
  - `kkatano/bakeneko60`
  - `kkatano/bakeneko65/rev2`
  - `kkatano/bakeneko65/rev3`
  - `kkatano/bakeneko80`
  - `kkatano/wallaby`
  - `kkatano/yurei`
  - `knops/mini`
  - `kona_classic`
  - `kopibeng/mnk60_stm32`
  - `kopibeng/mnk65`
  - `kopibeng/mnk65_stm32`
  - `kopibeng/mnk88`
  - `kopibeng/typ65`
  - `kopibeng/xt60`
  - `kopibeng/xt60_singa`
  - `kopibeng/xt65`
  - `kopibeng/xt8x`
  - `kprepublic/bm16s`
  - `kprepublic/bm40hsrgb/rev1`
  - `kprepublic/bm65hsrgb/rev1`
  - `kprepublic/bm68hsrgb/rev1`
  - `kprepublic/bm980hsrgb`
  - `kprepublic/cospad`
  - `ktec/daisy`
  - `kumaokobo/kudox/columner`
  - `kumaokobo/kudox/rev1`
  - `kumaokobo/kudox/rev2`
  - `kumaokobo/kudox/rev3`
  - `kumaokobo/kudox_full/rev1`
  - `kumaokobo/kudox_game/rev1`
  - `kumaokobo/kudox_game/rev2`
  - `kumaokobo/pico/65keys`
  - `kumaokobo/pico/70keys`
  - `kv/revt`
  - `kwub/bloop`
  - `ky01`
2024-05-22 21:59:35 +01:00
..
keymaps Add Kindakeyboards Conone65 Via support (#22320) 2023-10-31 01:51:29 +00:00
keyboard.json Migrate `LOCKING_*_ENABLE` to Data-Driven: K, Part 3 (#23770) 2024-05-22 21:59:35 +01:00
readme.md Add Kindakeyboards Conone65 Via support (#22320) 2023-10-31 01:51:29 +00:00

readme.md

Conone 65

Conone65 PCB

The Conone 65 is a custom keyboard designed and machined in Belgium.

Make example for this keyboard (after setting up your build environment):

make kindakeyboards/conone65:default

Flashing example for this keyboard:

make kindakeyboards/conone65:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available