qmk_firmware/keyboards/alhenkb/macropad5x4
Ryan c3c51231cc
Clean up trailing commas from info.json (#20812)
2023-05-09 17:52:03 +10:00
..
keymaps
info.json Clean up trailing commas from info.json (#20812) 2023-05-09 17:52:03 +10:00
readme.md [Keyboard] Add alhenkb macropad (#20123) 2023-03-29 11:47:14 -07:00
rules.mk [Keyboard] Add alhenkb macropad (#20123) 2023-03-29 11:47:14 -07:00

readme.md

AlhenKB - Macropad 5x4 and Numpad

Imgur Image Imgur Image

A macropad 5x4 for MerryPCB.

  • Keyboard Maintainer: Alhen
  • Hardware Supported: MerryPCB

Make example for this keyboard (after setting up your build environment):

Macropad:

make alhenkb/macropad5x4:default

Numpad:

make alhenkb/macropad5x4:numpad

Flashing example for this keyboard:

Macropad:

make alhenkb/macropad5x4:default:flash

Numpad:

make alhenkb/macropad5x4:numpad:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available