qmk_firmware/keyboards/bpiphany/ghost_squid
Ryan 976317df3c
Move fullsize layouts to data driven (#20317)
2023-04-04 14:39:20 +10:00
..
keymaps/default Fixup bpiphany/ghost_squid (#18842) 2022-10-25 14:40:40 +01:00
config.h Move LED indicator config to data driven (#19800) 2023-02-17 13:14:29 +11:00
ghost_squid.c
ghost_squid.h Move fullsize layouts to data driven (#20317) 2023-04-04 14:39:20 +10:00
info.json Move fullsize layouts to data driven (#20317) 2023-04-04 14:39:20 +10:00
matrix.c
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Ghost Squid Controller

This is the firmware for Rev. 20140518 of the Ghost Squid controller by Bathroom Epiphanies, a replacement controller for the Cooler Master Quick Fire XT.

The code was adapted from the BathroomEpiphanies QMK Firmware.

  • Keyboard Maintainer: QMK Community
  • Hardware Supported: Ghost Squid
  • Hardware Availability: 1upkeyboards

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

Make example for this keyboard (after setting up your build environment):

104 key default layout:

make bpiphany/ghost_squid:default

Flashing example for this keyboard:

make bpiphany/ghost_squid:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.