qmk_firmware/keyboards/cheshire/curiosity
Ryan 47966dc2a6
Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303)
2023-04-06 18:00:54 +10:00
..
keymaps Deprecate `VLK_TOG` for `VK_TOGG` (#18807) 2022-10-22 21:45:20 +01:00
chconf.h ChibiOS conf migrations... take 11 (#11646) 2021-01-21 17:00:53 +11:00
config.h Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
curiosity.c Move Alice and Ergodox layouts to data driven (#20340) 2023-04-05 15:50:56 +10:00
info.json Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
readme.md New PCB - Curiosity - Alice Layout PCB (#7725) 2019-12-31 02:29:36 +11:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Cheshire Curiosity PCB

Cheshire Alice Keyboard Replacement PCB

  • Keyboard Maintainer: sidcarter
  • Hardware Supported: Cheshire Curiosity PCB, STM32F072CBT6
  • Designed By: Nightingale Studios/PhoenixStarr

Make example for this keyboard (after setting up your build environment):

make cheshire/curiosity:default:flash

If you are flashing this keyboard/pcb for the first time:

* Set the dip switch on the reverse of the PCB to 1
* Hit the reset button and then do
* make cheshire/curiosity:default
* After flashing the keyboard successfully, you can reset the dip switch back to 0

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.