qmk_firmware/keyboards/dtisaac/dosa40rgb
Ryan 79aa319946
`info.json` whitespace cleanups (#20651)
2023-05-02 08:25:15 +10:00
..
keymaps/default Normalise output selection (Bluetooth) keycodes (#19004) 2022-11-08 19:03:31 +00:00
config.h Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
dosa40rgb.c Move single `LAYOUT`s to data driven (#20365) 2023-04-12 13:42:51 +10:00
info.json `info.json` whitespace cleanups (#20651) 2023-05-02 08:25:15 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Move `RGB_MATRIX_DRIVER` to data driven (#20350) 2023-04-08 18:08:08 +10:00

readme.md

dosa40rgb

dosa40rgb

A 40 percent keyboard dosa40rgb Bluetooth Low Energy

  • Keyboard Maintainer: DTIsaac
  • Hardware Supported: ATmega32U4 + Bluefruit LE SPI

Make example for this keyboard (after setting up your build environment):

make dtisaac/dosa40rgb:default

Flashing example for this keyboard:

make dtisaac/dosa40rgb:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available