Robert
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/elephant42
History
Ryan 363bfdbfda
Move `RGBLIGHT_LIMIT_VAL` to data driven (#20974) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
 		2023-05-27 12:27:44 +10:00
..
keymaps Properly fix elephant42 (#18908) 2022-10-30 15:34:24 +00:00
lib
…
config.h Move `RGBLIGHT_LIMIT_VAL` to data driven (#20974) 2023-05-27 12:27:44 +10:00
elephant42.c Move single `LAYOUT`s to data driven (#20365) 2023-04-12 13:42:51 +10:00
info.json Move `RGBLIGHT_LIMIT_VAL` to data driven (#20974) 2023-05-27 12:27:44 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Move `RGB_MATRIX_DRIVER` to data driven (#20350) 2023-04-08 18:08:08 +10:00

readme.md

elephant42

elephant42

A split keyboard with 3x5+2 vertically staggered keys and 4 thumb keys.

Make example for this keyboard (after setting up your build environment):

make elephant42:default

Flashing example for this keyboard:

make elephant42:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available