qmk_firmware/keyboards/eternal_keypad
Ryan 5bd68e3695
Move single `LAYOUT`s to data driven (#20365)
2023-04-12 13:42:51 +10:00
..
keymaps RESET -> QK_BOOT user keymaps (#17940) 2022-08-21 23:55:30 +01:00
config.h Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
info.json Move single `LAYOUT`s to data driven (#20365) 2023-04-12 13:42:51 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

eternal_keypad

eternal_keypad

A 36 key gaming keypad that can be assembled and configured for both left and right handed mouse users.

  • Keyboard Maintainer: duckyb
  • Hardware Supported: ETERNAL Keypad
  • Hardware Availability: Open Source, files available on gitHub

Make example for this keyboard (after setting up your build environment):

make eternal_keypad:default

Flashing example for this keyboard:

make eternal_keypad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,1) in the matrix (the top left key or Escape) and plug in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available (activated by holding the lower right key and tapping the lower left key)
  • Physical reset button: Briefly sort the pads labeled "RST" and "GND" on the micro-controller