qmk_firmware/keyboards/fjlabs/sinanju
Ryan 4d8dd55bf9
Move 60% layouts to data driven (#20477)
2023-04-27 07:49:03 +10:00
..
keymaps Remove legacy Grave Escape keycodes (#18787) 2022-10-20 18:04:11 -07:00
config.h Move matrix config to info.json, part 2 (#19987) 2023-03-10 22:16:56 +11:00
info.json Move 60% layouts to data driven (#20477) 2023-04-27 07:49:03 +10:00
readme.md
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Sinanju

The following is the QMK Firmware for the Windz Sinanju PCB.

  • Keyboard Maintainer: FJLabs
  • Hardware Supported: Sinanju

Make example for this keyboard (after setting up your build environment):

make fjlabs/sinanju:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader can be entered by pressing the reset button near the main microcontroller while the board is plugged in. Alternatively, it may be entered by holding the top-left-most switch and plugging in the PCB while held.