qmk_firmware/keyboards/handwired/pill60
Ryan 5bd68e3695
Move single `LAYOUT`s to data driven (#20365)
2023-04-12 13:42:51 +10:00
..
blackpill_f401 Move matrix config to info.json, part 6 (#20019) 2023-03-11 00:32:05 +11:00
blackpill_f411 Move matrix config to info.json, part 6 (#20019) 2023-03-11 00:32:05 +11:00
bluepill Move matrix config to info.json, part 6 (#20019) 2023-03-11 00:32:05 +11:00
keymaps/default Remove legacy Grave Escape keycodes (#18787) 2022-10-20 18:04:11 -07:00
config.h Move matrix config to info.json, part 6 (#20019) 2023-03-11 00:32:05 +11:00
info.json Move single `LAYOUT`s to data driven (#20365) 2023-04-12 13:42:51 +10:00
readme.md
rules.mk Move backlight config to data driven (#19910) 2023-02-26 08:37:57 +11:00

readme.md

Pill60

Pill60

A 60% open source keyboard with rotary encoder, OLED screen, and Hotswap socket, using STM32F103 / Blue Pill.

  • Keyboard Maintainer: Ikta#8871 (Discord)
  • Hardware Supported: Pill60 PCB, STM32F103C8T6
  • Hardware Availability: github

Step by step guide on how to install a bootloader if your bluepill don't have one :

  1. Download this bootloader
  2. Flash Using FTDI Serial to USB converter or an ST-Link, as in this video, but replacing the bootloader file
  3. Put Boot 1 to 1, then reset the board, if you're using the same bootloader, the LED should blink
  4. Flash your .bin file using dfu-util
  5. Put Boot 1 back to 0, then reset again

Building Guide :

  • Use qmk compile -kb handwired/pill60 -km default to compile default keymap and using STM32F103 as an MCU
  • Use qmk compile -kb handwired/pill60/blackpill_f401 -km default to compile default keymap and using STM32F401 as an MCU
  • Use qmk compile -kb handwired/pill60/blackpill_f411 -km default to compile default keymap and using STM32F411 as an MCU

Warning: currently tested MCU is STM32F103, I am still waiting for f401 and f411 to arrive

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.