qmk_firmware/keyboards/keyhive/uno
Ryan 47966dc2a6
Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303)
2023-04-06 18:00:54 +10:00
..
keymaps Remove legacy sendstring keycodes (#18749) 2022-10-17 13:45:23 +01:00
rev1 Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
rev2 Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
info.json Move layouts for direct_pins boards to data driven (#19872) 2023-02-19 18:55:12 +11:00
readme.md
rules.mk

readme.md

Uno

Uno

A 1-key, in-USB "board" for the lulz

There are two revisions of Uno. If your Uno supports a rotary encoder, use rev2. If it does not support a rotary encoder, use rev1. The following examples use rev2 — be sure to change this if you are using rev1.

Make example for this keyboard (after setting up your build environment; make sure to change rev2 to your Uno's version):

make keyhive/uno/rev2:default

Flashing example for this keyboard (change rev2 to rev1 if needed):

make keyhive/uno/rev2:default:flash

If you prefer to use the qmk tool:

qmk compile -kb keyhive/uno/rev2 -km default

Create your own keymap with:

qmk new-keymap -kb keyhive/uno/rev2

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Credits

  • Everything by Snipeye