qmk_firmware/keyboards/macro3
Nick Brassel c9f619124d
Encodermap direction define. (#20454)
2023-04-15 16:18:44 +01:00
..
keymaps/default Encodermap direction define. (#20454) 2023-04-15 16:18:44 +01:00
info.json Move macro3 to data-driven (#20046) 2023-03-10 10:38:56 -07:00
macro3.c Move layouts for direct_pins boards to data driven (#19872) 2023-02-19 18:55:12 +11:00
readme.md [Keyboard] Update encoder code for macro3 (#16005) 2022-03-07 20:09:54 -08:00
rules.mk Move macro3 to data-driven (#20046) 2023-03-10 10:38:56 -07:00

readme.md

Macro3

Macro3

Macro3 is a low-profile macro pad with dual encoder support designed by @davidphilipbarr.

Keyboard Info

Make example for this keyboard (after setting up your build environment):

make macro3:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top right key and plug in the controller.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is configured.
  • Physical reset pins: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material.