Robert
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/mechlovin/zed65
History
James Young 3a42fbb0c9
Mechlovin Zed65 rev1 Touch-Up (#21373) 
* [docs] add layout/matrix diagram

* [refactor] rename LAYOUT_65_ansi_tsangan to LAYOUT_65_ansi
 		2023-06-24 19:54:23 +01:00
..
mono_led Move `RGBLIGHT_LIMIT_VAL` to data driven (#20974) 2023-05-27 12:27:44 +10:00
no_backlight Move `RGBLIGHT_LIMIT_VAL` to data driven (#20974) 2023-05-27 12:27:44 +10:00
rev1 Mechlovin Zed65 rev1 Touch-Up (#21373) 2023-06-24 19:54:23 +01:00
info.json [Keyboard] Add the Zed65 rev.1 PCB (#21043) 2023-06-03 01:03:45 -06:00
readme.md Remove more RESET keycode references (#18252) 2022-09-03 06:50:44 +01:00
rules.mk [Keyboard] Add the Zed65 rev.1 PCB (#21043) 2023-06-03 01:03:45 -06:00

readme.md

Zed65

Mechlovin's 65% PCB Platform, which works as the base for our 65%-layout PCB designs.

Make example for this keyboard (after setting up your build environment):

make mechlovin/zed65:default

Flashing example for this keyboard:

make mechlovin/zed65:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available