qmk_firmware/keyboards/mwstudio/mw75r2
Ryan 5bd68e3695
Move single `LAYOUT`s to data driven (#20365)
2023-04-12 13:42:51 +10:00
..
keymaps [Core] Refactor `keyevent_t` for 1ms timing resolution (#15847) 2023-04-03 18:33:45 +10:00
config.h Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
info.json Move single `LAYOUT`s to data driven (#20365) 2023-04-12 13:42:51 +10:00
mw75r2.c Move single `LAYOUT`s to data driven (#20365) 2023-04-12 13:42:51 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Move `RGB_MATRIX_DRIVER` to data driven (#20350) 2023-04-08 18:08:08 +10:00

readme.md

MW75R2

MW75R2

Support Atmega32u4 keyboard.

  • Keyboard Maintainer: TW59420
  • Hardware Supported: Atmega32u4

Make example for this keyboard (after setting up your build environment):

make mwstudio/mw75r2:default 

Flashing example for this keyboard:

make mwstudio/mw75r2:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

  • Physical reset button: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available