qmk_firmware/keyboards/mxss
Ryan 17de141c92
Add missing layout data for a handful of boards (#20931)
* Add missing layout data for a handful of boards

* typo

* Add missing layouts for stoutgat

* Add missing layout for j80

* Replace missing layout with alias for wraith

* Add missing layout for matrix/me

* Add missing layout for satisfaction75/prototype

* Apply suggestions from code review

* Rename wt80-a layouts

* Rename rosa layouts

* Add missing layouts for naked48

* Add missing layouts for naked60

* Add missing layouts for uma

* Remove unused and pointless `LAYOUT_stack` for buzzard

* Add missing layout for keyboardio/model01

* Add missing layout for smk65 revf

* Fix via keymap for h60

* Add missing layout for jabberwocky/v1

* Apply suggestions from code review

* Add missing layout for m3n3van

* Add missing layout for giabalanai

* Add missing layouts for treadstone48/rev1

* Add missing layouts for squiggle

* Update keyboards/marksard/treadstone48/rev1/info.json
2023-05-16 00:00:08 -07:00
..
keymaps Fixup missing include in mxss via keymap (#20475) 2023-04-17 13:08:41 +01:00
templates Move remaining `LAYOUT`s to data driven (#20422) 2023-04-15 21:07:32 +10:00
config.h Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
info.json Add missing layout data for a handful of boards (#20931) 2023-05-16 00:00:08 -07:00
mxss.c Move remaining `LAYOUT`s to data driven (#20422) 2023-04-15 21:07:32 +10:00
mxss_frontled.c Use a macro to compute the size of arrays at compile time (#18044) 2022-08-30 10:20:04 +02:00
mxss_frontled.h Reallocate SAFE_RANGE (#19909) 2023-02-23 09:49:07 +11:00
readme.md Reallocate SAFE_RANGE (#19909) 2023-02-23 09:49:07 +11:00
rgblight.c [Keyboard] Fix mxss rgblight.c compilation issues (#20804) 2023-05-08 23:39:49 +01:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

MxSS - Polycarb 65% Kit for MX/SMK

MxSS - Polycarb 65% Kit for MX/SMK

Important Note:

This PCB supports the VIA configurator, and this is the recommended way to configure the keymap on this keyboard. Building the firmware should only be necessary if you would like to change the colours of the front LEDs in indicator mode.

For more information about the VIA configurator, see here.

Information:

  • Case: Frosted Polycarbonate, CNC milled
  • Plate: Brass, mirror-finished and electroplated
  • Weight: Same as plate
  • PCB: Custom designed for the MxSS by kawasaki161, White solder mask and ENIG finish

Details:

  • 2.9 degrees angle on the case
  • Top mount plate
  • Center USB, Type-B Mini
  • MX and SMK (White and Orange) switch support
  • Holtite support
  • RGB underglow
  • 1.5kg with plate and weight

Keyboard Maintainer: MxBlue

Hardware Supported: Custom PCB, ATMega32u4

Hardware Availability: https://geekhack.org/index.php?topic=94986.0

Make example for this keyboard (after setting up your build environment):

make mxss:default

See build environment setup then the make instructions for more information.

Front LED Operation

The MxSS PCB has 2 front RGB LEDs which has a separate brightness and mode of operation to the rest of the RGB LEDs. These are controlled through the supplied custom keycodes.

There are 3 modes of operation:

  • FLED_OFF - Front LEDs stay off
  • FLED_RGB - Front LEDs are part of the standard RGB LED modes, only works correctly with rainbow modes (will fix on request)
  • FLED_INDI - Top front LED represents Caps Lock status, bottom LED represents current layer

Colors for FLED_INDI mode are hardcoded as hue/saturation values, the caps lock color can be found in mxss_frontled.h, the layer colors are defined in keymap.c (see default/keymap.c for example).

Custom Keycodes

  • FLED_MOD - Cycle between the 3 modes (FLED_OFF -> FLED_RGB -> FLED_INDI)
  • FLED_VAI - Increase front LED brightness
  • FLED_VAD - Decrease front LED brightness