qmk_firmware/keyboards/nixkeyboards/day_off
James Young 58939cf30e
Nix Keyboards Day Off 60 Touch-Up and Layout Additions (#20746)
* add matrix_diagram.md

* physically arrange layout macro & keymap

* add LAYOUT_ansi_split_bs_rshift_space

* add LAYOUT_ansi_split_bs_rshift

* add LAYOUT_ansi

* add LAYOUT_iso_split_bs_rshift_space

* add LAYOUT_iso_split_bs_rshift

* add LAYOUT_iso
2023-05-06 14:30:16 -07:00
..
keymaps/default Nix Keyboards Day Off 60 Touch-Up and Layout Additions (#20746) 2023-05-06 14:30:16 -07:00
info.json Nix Keyboards Day Off 60 Touch-Up and Layout Additions (#20746) 2023-05-06 14:30:16 -07:00
matrix_diagram.md Nix Keyboards Day Off 60 Touch-Up and Layout Additions (#20746) 2023-05-06 14:30:16 -07:00
readme.md Fixup day_off (#19067) 2022-11-14 09:48:31 +11:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Day Off Support

More info at nixkeyboards.com

  • Keyboard Maintainer: Schrobie
  • Hardware Supported: Day Off PCBs, both solderable and hotswap
  • Hardware Availability: Nix Keyboards

Make example for this keyboard (after setting up your build environment):

make nixkeyboards/day_off:default

Flashing example for this keyboard:

make nixkeyboards/day_off:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,1) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available