qmk_firmware/keyboards/pearlboards/atlas
James Young 327e8d5dd7
Pearl Boards Atlas Layout Additions (#20918)
* add matrix_diagram.md

* info.json: apply friendly formatting

* info.json: correct layout data

Moves the position representing the Rotary Encoder to the top of the layout.

* refactor keymaps

Applies the following changes to the `default` and `via` keymaps:

- four-space indent
- use of QMK-native keycode aliases
- numerically-indexed keymap layers
- updated grid alignment of keycodes

* add LAYOUT_ansi_blocker_tsangan_wkl_split_bs

* add LAYOUT_ansi_blocker_tsangan_wkl

* add LAYOUT_iso_blocker_tsangan_wkl_split_bs

* add LAYOUT_iso_blocker_tsangan_wkl
2023-05-13 05:06:34 -07:00
..
keymaps Pearl Boards Atlas Layout Additions (#20918) 2023-05-13 05:06:34 -07:00
config.h Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
info.json Pearl Boards Atlas Layout Additions (#20918) 2023-05-13 05:06:34 -07:00
matrix_diagram.md Pearl Boards Atlas Layout Additions (#20918) 2023-05-13 05:06:34 -07:00
readme.md Revert RESET-> QK_BOOT in Read Me files where applicable (#19262) 2022-12-09 03:12:49 +11:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Atlas

Atlas

Atlas is a timeless Greek themed 65 percent keyboard. The construction uses 6061 alu, pvd coated brass/stainless steel and dyed polycarbonate. The finishes include e-coating, anodizing, micro arc anodization, metal polish and fine beadblasting. Layouts are limited to a few ANSI variations such as tsangan/wkl and ISO. The keyboard also has a usb-c daugtherboard, an integrated dual usb hub with an audio jack and dac, and a rotary encoder. The case has indicator lights and is gasket mounted. The pcb is designed by me in house and has some super cool tricks up its sleeve as well.

Make example for this keyboard (after setting up your build environment):

make pearlboards/atlas:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 2 ways:

  • Physical reset button: Briefly press the button on the back of the PCB labeled RESET
  • Keycode in layout: Press the key mapped to QK_BOOT in conjunction with the key mapped to MO(1))