qmk_firmware/keyboards/pimentoso/touhoupad
Ryan 363bfdbfda
Move `RGBLIGHT_LIMIT_VAL` to data driven (#20974)
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-05-27 12:27:44 +10:00
..
keymaps/default
config.h Move `RGBLIGHT_LIMIT_VAL` to data driven (#20974) 2023-05-27 12:27:44 +10:00
info.json Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
readme.md
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

TouhouPad

TouhouPad

A 10 key gamepad specifically for playing Touhou danmaku games.

You can find building instructions and gerber files to print the circuit board on the project page.

  • Keyboard Maintainer: Michele Ferri
  • Hardware Supported: Paddino02 PCB rev1, rev2 + Arduino Pro Micro
  • Hardware Availability: the PCB is open source and can be freely printed at websites such as JLCPCB

Make example for this keyboard (after setting up your build environment):

make pimentoso/touhoupad:default

The gamepad case is completely exposed on the underside, so to enter bootloader mode, just short the RST and GND pins of the pro micro using a metal object.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.