qmk_firmware/keyboards/psuieee/pluto12
Ryan 364c06d939
Move small macropad-ish layouts to data driven (#20341)
2023-04-05 15:46:59 +10:00
..
keymaps
config.h Move matrix config to info.json, part 4 (#20001) 2023-03-11 00:00:24 +11:00
info.json Move small macropad-ish layouts to data driven (#20341) 2023-04-05 15:46:59 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

pluto12

pluto12

The pluto12 is a 4x3 macropad designed for use in the Penn State IEEE Student Chapter's 2021-22 workshop series. Designed by the 2021-22 Penn State IEEE Projects Committee.

Make example for this keyboard (after setting up your build environment):

make psuieee/pluto12:default

Flashing example for this keyboard:

make psuieee/pluto12:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available