qmk_firmware/keyboards/saevus/cor_tkl
Ryan 47966dc2a6
Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303)
2023-04-06 18:00:54 +10:00
..
keymaps Move TKL F13 and FRL layouts to data driven (#20310) 2023-04-04 14:29:50 +10:00
config.h Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
cor_tkl.c Move TKL F13 and FRL layouts to data driven (#20310) 2023-04-04 14:29:50 +10:00
info.json Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
readme.md
rules.mk Move `WS2812_DRIVER` to data driven (#20248) 2023-03-26 18:22:12 +11:00

readme.md

saevus cor TKL

Cor TKL

  • Keyboard Maintainer: Ramon Imbao
  • Hardware Supported: RP2040

Make example for this keyboard (after setting up your build environment):

make saevus/cor_tkl:via

To get to the bootloader, simply press the reset button located at the back of the PCB. You can then flash new firmware onto it.

Flashing example for this keyboard:

make saevus/cor_tkl:via:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.