History

Ryan 0ddb7d7863 Move single `60_ansi`, `60_hhkb` and `60_iso` layouts to data driven (#20438 )		2023-04-15 21:09:08 +10:00
..
keymaps	Remove legacy keycodes, part 5 (#18710 )	2022-10-15 22:29:43 +01:00
ck60.c	Move single `60_ansi`, `60_hhkb` and `60_iso` layouts to data driven (#20438 )	2023-04-15 21:09:08 +10:00
config.h	Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303 )	2023-04-06 18:00:54 +10:00
info.json	Move single `60_ansi`, `60_hhkb` and `60_iso` layouts to data driven (#20438 )	2023-04-15 21:09:08 +10:00
readme.md	…
rules.mk	Move `RGB_MATRIX_DRIVER` to data driven (#20350 )	2023-04-08 18:08:08 +10:00

readme.md

ck60

A 60% keyboard implementation based around the ATMEGA32u4 with per-key RGB.

Keyboard Maintainer: hadi
Hardware Supported: CK60 PCB
Hardware Availability: https://candykeys.com/

Make example for this keyboard (after setting up your build environment):

make senselessclay/ck60:default

Flashing example for this keyboard:

make senselessclay/ck60:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

If you'd like to reset the board into bootloader mode for flashing using QMK Toolbox, simply press the reset button directly above the controller assembly on the bottom side of the PCB.