qmk_firmware/keyboards/woodkeys/scarletbandana
James Young d70d7815dc
Scarlet Bandana Layout Additions (#20882)
* add matrix_diagram.md

* info.json: apply friendly formatting

* info.json: correct layout data

* rename LAYOUT_all to LAYOUT_65_xt_ansi_split_space_split_bs

* add LAYOUT_65_xt_ansi_split_space

* add LAYOUT_65_xt_ansi_split_bs

* add LAYOUT_65_xt_ansi

* update readme.md

- convert metadata section to list
- update Availability link (mark as "no longer available" as the vendor no longer ships)
- add Flashing and Bootloader instructions
2023-05-12 17:15:12 -07:00
..
keymaps/default Scarlet Bandana Layout Additions (#20882) 2023-05-12 17:15:12 -07:00
config.h Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
info.json Scarlet Bandana Layout Additions (#20882) 2023-05-12 17:15:12 -07:00
matrix_diagram.md Scarlet Bandana Layout Additions (#20882) 2023-05-12 17:15:12 -07:00
readme.md Scarlet Bandana Layout Additions (#20882) 2023-05-12 17:15:12 -07:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Scarlet Bandana Version IV Mark 2

Make example for this keyboard (after setting up your build environment):

make woodkeys/scarletbandana:default

Flashing example for this keyboard:

make woodkeys/scarletbandana:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available