Robert
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/yandrstudio/nz67v2
History
Nick Brassel 5d6d959421
Fix up via keymap builds. (#20383) 
* Fix up via keymap builds.

- Usages of old IS_PRESSED.

* Fix up bad code.

* Fix up bad code.
 		2023-04-09 13:41:32 +01:00
..
keymaps Fix up via keymap builds. (#20383) 2023-04-09 13:41:32 +01:00
board.h Fixup ChibiOS header inclusion search ordering. (#19623) 2023-01-19 01:05:29 +00:00
config.h Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
halconf.h
…
info.json Move `RGB_MATRIX_DRIVER` to data driven (#20350) 2023-04-08 18:08:08 +10:00
mcuconf.h
…
nz67v2.c Remove magic bodges from via keymaps (#19890) 2023-02-22 01:15:18 +00:00
nz67v2.h Move 65% layouts to data driven (#20308) 2023-04-04 15:20:10 +10:00
readme.md
…
rules.mk Move `RGB_MATRIX_DRIVER` to data driven (#20350) 2023-04-08 18:08:08 +10:00

readme.md

nz67v2

nz67v2

A 67 keys keyboard with rgb (key and underground). This keyboard use 16mhz HSE and APM32F103 as MCU.

Make example for this keyboard (after setting up your build environment):

make yandrstudio/nz67v2:default

See build environment setup then the make instructions for more information.

Bootloader

Enter the bootloader in 2 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key which is Escape in this keyboard) and plug in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available.