qmk_firmware/keyboards/kb58
Ryan 5bd68e3695
Move single `LAYOUT`s to data driven (#20365)
2023-04-12 13:42:51 +10:00
..
keymaps/default
config.h Move matrix config to info.json, part 8 (#20030) 2023-03-11 04:59:07 +11:00
info.json Move single `LAYOUT`s to data driven (#20365) 2023-04-12 13:42:51 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

KB58

kb58_pico

This is 58 keys keyboard.

  • Keyboard Maintainer: beanaccle
  • Hardware Supported: KB58
  • Hardware Availability: KB58 Pico

Make example for this keyboard (after setting up your build environment):

make kb58:default

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.