qmk_firmware/keyboards/pegasus
Ryan 441988ef38
Move `default` layouts to data driven (#20349)
2023-04-08 20:50:50 +10:00
..
keymaps RESET -> QK_BOOT user keymaps (#17940) 2022-08-21 23:55:30 +01:00
config.h Move matrix config to info.json, part 4 (#20001) 2023-03-11 00:00:24 +11:00
info.json Move `default` layouts to data driven (#20349) 2023-04-08 20:50:50 +10:00
pegasus.c Move `default` layouts to data driven (#20349) 2023-04-08 20:50:50 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Pegasus

pegasus

Pegasus is a 40% keyboard with a 12.75u "WKL" layout with 0.75u blockers.

  • Keyboard Maintainer: melonbred
  • Hardware Supported: The PCBs, controllers supported
  • Hardware Availability: Links to where you can find this hardware

Make example for this keyboard (after setting up your build environment):

make pegasus:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available