qmk_firmware/keyboards/whitefox/board_IS31FL3731C.h

110 lines
4.4 KiB
C

/*
Copyright 2016 Fred Sundvik <fsundvik@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _GDISP_LLD_BOARD_H
#define _GDISP_LLD_BOARD_H
static const I2CConfig i2ccfg = {
400000 // clock speed (Hz); 400kHz max for IS31
};
#define GDISP_SCREEN_WIDTH 16
#define GDISP_SCREEN_HEIGHT 5
static const uint8_t led_mask[] = {
0xFF, 0x00, /* C1-1 -> C1-16 */
0xFF, 0x00, /* C2-1 -> C2-16 */
0xFF, 0x00, /* C3-1 -> C3-16 */
0xFF, 0x00, /* C4-1 -> C4-16 */
0xFF, 0x00, /* C5-1 -> C5-16 */
0xFF, 0x00, /* C6-1 -> C6-16 */
0xFF, 0x00, /* C7-1 -> C7-16 */
0xFF, 0x00, /* C8-1 -> C8-16 */
0xFE, 0x00, /* C9-1 -> C9-16 */
};
// The address of the LED
#define LA(c, r) (c + r * 16 )
// Need to be an address that is not mapped, but inside the range of the controller matrix
#define NA LA(8, 8)
// The numbers in the comments are the led numbers DXX on the PCB
// The mapping is taken from the schematic of left hand side
static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = {
// 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
{ LA(0, 0), LA(1, 0), LA(2, 0), LA(3, 0), LA(4, 0), LA(5, 0), LA(6, 0), LA(7, 0), LA(0, 1), LA(1, 1), LA(2, 1), LA(3, 1), LA(4, 1), LA(5, 1), LA(6, 1), LA(7, 1)},
// 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
{ LA(0, 2), LA(1, 2), LA(2, 2), LA(3, 2), LA(4, 2), LA(5, 2), LA(6, 2), LA(7, 2), LA(0, 3), LA(1, 3), NA, LA(2, 3), LA(3, 3), LA(4, 3), LA(5, 3), LA(6, 3)},
// 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
{ LA(7, 3), LA(0, 4), LA(1, 4), LA(2, 4), LA(3, 4), LA(4, 4), LA(5, 4), LA(6, 4), LA(7, 4), LA(0, 5), NA, LA(1, 5), LA(2, 5), LA(3, 5), LA(4, 5), LA(5, 5)},
// 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61
{ LA(6, 5), LA(7, 5), LA(0, 6), LA(1, 6), LA(2, 6), LA(3, 6), LA(4, 6), LA(5, 6), LA(6, 6), LA(7, 6), NA, LA(0, 7), LA(1, 7), LA(2, 7), LA(3, 7), LA(4, 7)},
// 62 63 64 65 66 67 68 69 70 71
{ LA(5, 7), LA(6, 7), LA(7, 7), NA, NA, NA, LA(0, 8), NA, NA, NA, LA(1, 8), LA(2, 8), LA(3, 8), LA(4, 8), LA(5, 8), LA(6, 8)},
};
#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
#define IS31_TIMEOUT 5000
static GFXINLINE void init_board(GDisplay *g) {
(void) g;
/* I2C pins */
palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL);
palClearPad(GPIOB, 16);
/* start I2C */
i2cStart(&I2CD1, &i2ccfg);
// try high drive (from kiibohd)
I2CD1.i2c->C2 |= I2Cx_C2_HDRS;
// try glitch fixing (from kiibohd)
I2CD1.i2c->FLT = 4;
}
static GFXINLINE void post_init_board(GDisplay *g) {
(void) g;
}
static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) {
(void) g;
return led_mask;
}
static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y)
{
(void) g;
return led_mapping[y][x];
}
static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) {
(void) g;
if(!shutdown) {
palSetPad(GPIOB, 16);
}
else {
palClearPad(GPIOB, 16);
}
}
static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
(void) g;
i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT));
}
#endif /* _GDISP_LLD_BOARD_H */