qmk_firmware/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c

122 lines
5.6 KiB
C

#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 16
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
};
// Fillers to make layering more clear
#define _______ KC_TRNS
#define XXXXXXX KC_NO
#define KC_LOWR LOWER
#define KC_RASE RAISE
#define KC_RST RESET
#define KC_CAD LCTL(LALT(KC_DEL))
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT(
// ,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------.
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_BSPC,
// |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------|
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT,
// |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_ENT,
// '-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------'
KC_LGUI,KC_LOWR, KC_SPC, KC_SPC,KC_RASE,KC_RALT
// `-------+-------+-------` `-------+-------+-------`
),
[_LOWER] = LAYOUT(
// ,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------.
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
// |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------|
_______,_______,_______,_______,_______,_______, _______,_______,_______,KC_LCBR,KC_RCBR,KC_BSLS,
// |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------|
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,
// '-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------'
_______,_______,_______, _______,_______,_______
// `-------+-------+-------` `-------+-------+-------`
),
[_RAISE] = LAYOUT(
// ,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------.
KC_GRV,KC_EXLM, KC_AT,KC_HASH, KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN, KC_DEL,
// |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------|
_______,_______,_______,_______,KC_MINS, KC_EQL, _______, KC_UP,_______,KC_LBRC,KC_RBRC,KC_PIPE,
// |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------|
_______,_______,_______,_______,_______,_______, KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,_______,
// '-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------'
_______,_______,_______, _______,_______,_______
// `-------+-------+-------` `-------+-------+-------`
),
[_ADJUST] = LAYOUT(
// ,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------.
_______,_______,_______,_______, KC_RST,_______, _______,_______,_______,_______,_______, KC_CAD,
// |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------|
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,
// |-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------|
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,
// '-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------'
_______,_______,_______, _______,_______,_______
// `-------+-------+-------` `-------+-------+-------`
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_ADJUST);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
}
return true;
}