9bd6d6112d
* Keyboard: HandWired/XeaL60 * Updated rules.mk * Mapping for layout was flipped * Figured out how to re-map bad pins. * Updated Keymap * Enabled audio, Forced NKRO * Added QMK_KEYS_PER_SCAN * Removed more unnecessary files, since split_keyboards are in main QMK branch already. * Simplified rules.mk in rev1 * Removed i2c from matrix.c * Re-formatted to 4 spaces per tab, * Changed note for NUMPAD * Added I2C support back! * Fixed keyboard mappings. Both sides work * Moved i2c configuration from keymaps/default/config.h to config.h * Changed SCL_CLOCK to 400000L * Added DEBUG_MATRIX_SCAN_RATE for future optimization efforts * Removed row2col code to clean up matrix.c * Scan rate from 2100 -> 4200 by using Nop instead of waiting 30us between columns. * Further optimized column reading via optimized_col_reader. * Immediate key-recognition * Switched back to own implementation of SPLIT_KEYBOARD. Will optimize so that slave interrupts master. * Moved scanrate debug messages to another file. * Made matrix_scanrate.c compile if CONSOLE_ENABLE is off. Updated to latest i2c.c * Latest i2c uses a few bytes for lighting information * Optimizations in i2c.h to determine buffer size. * Disabled a whole bunch of features. TODO: Test that keyboard still works fine. * Minimum #define NO_ACTION's with still working keyboard * Fixed matrix not working due to offsets not being respected * Added numlock button for keymap. * Use I2C_KEYMAP_START offset * Removed serial, Backlight and RGB support * Removed need for split_flags. * Added audio on and off for numlock. * Renamed from xeal60 to xealous, simplified build system. * Used more shared split_common code. * Updated audio code. * moved tone_qwerty and tone_numpad to config.h. Removed keymaps/default/config.h * Added more shortcut keys in _FN layer. Increased debounce to 6ms due to fencepost error. * DF used with incorrect argument. Custom_keycodes no longer required. * Fixed bug in update_debounce_counters which was resulting in no debouncing! * Removed unnecessary #include
73 lines
3.2 KiB
Makefile
73 lines
3.2 KiB
Makefile
SRC += matrix_scanrate.c matrix.c
|
|
|
|
# MCU name
|
|
MCU = atmega32u4
|
|
|
|
# Processor frequency.
|
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
# automatically to create a 32-bit value in your source code.
|
|
#
|
|
# This will be an integer division of F_USB below, as it is sourced by
|
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
# does not *change* the processor frequency - it should merely be updated to
|
|
# reflect the processor speed set externally so that the code can use accurate
|
|
# software delays.
|
|
F_CPU = 16000000
|
|
|
|
#
|
|
# LUFA specific
|
|
#
|
|
# Target architecture (see library "Board Types" documentation).
|
|
ARCH = AVR8
|
|
|
|
# Input clock frequency.
|
|
# This will define a symbol, F_USB, in all source code files equal to the
|
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
# at the end, this will be done automatically to create a 32-bit value in your
|
|
# source code.
|
|
#
|
|
# If no clock division is performed on the input clock inside the AVR (via the
|
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
F_USB = $(F_CPU)
|
|
|
|
# Bootloader
|
|
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
|
# different sizes, comment this out, and the correct address will be loaded
|
|
# automatically (+60). See bootloader.mk for all options.
|
|
BOOTLOADER = caterina
|
|
|
|
# Interrupt driven control endpoint task(+60)
|
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|
|
|
# Build Options
|
|
# change to "no" to disable the options, or define them in the Makefile in
|
|
# the appropriate keymap folder that will get included automatically
|
|
#
|
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
|
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
CONSOLE_ENABLE = yes # Console for debug(+400)
|
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
|
MIDI_ENABLE = no # MIDI controls
|
|
AUDIO_ENABLE = yes # Audio output on port C6
|
|
UNICODE_ENABLE = no # Unicode
|
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
|
SPLIT_KEYBOARD = yes # Use shared split_common code
|
|
SUBPROJECT_rev1 = yes
|
|
|
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|
|
|
CUSTOM_MATRIX = yes
|
|
|
|
LAYOUTS = split60
|
|
|
|
DEFAULT_FOLDER = handwired/xealous/rev1
|