qmk_firmware/keyboards/lets_split/keymaps/OLED_sample
2017-06-28 12:58:58 -04:00
..
config.h update some copyright headers 2017-06-28 12:58:58 -04:00
keymap.c
Makefile
readme.md

SSD1306 OLED Display via I2C

Features

Some features supported by the firmware:

  • I2C connection between the two halves is required as the OLED display will use this connection as well. Note this requires pull-up resistors on the data and clock lines.
  • OLED display will connect from either side

Wiring

Work in progress...

OLED Configuration

Work in progress...