qmk_firmware/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/WritingBoardDrivers.txt

27 lines
1.8 KiB
Text

/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \page Page_WritingBoardDrivers Writing LUFA Board Drivers
*
* LUFA ships with several basic pre-made board drivers, to control hardware present on the supported board
* hardware - such as Dataflash ICs, LEDs, Joysticks, or other hardware peripherals. When compiling an application
* which makes use of one or more board drivers located in LUFA/Drivers/Board, you must also indicate what board
* hardware you are using in your project makefile. This is done by defining the BOARD macro using the -D switch
* passed to the compiler, with a constant of BOARD_{Name}. For example <b>-DBOARD=BOARD_USBKEY</b> instructs the
* compiler to use the USBKEY board hardware drivers.
*
* If your application does not use *any* board level drivers, you can omit the definition of the BOARD macro.
* However, some users may wish to write their own custom board hardware drivers which are to remain compatible
* with the LUFA hardware API. To do this, the BOARD macro should be defined to the value BOARD_USER. This indicates
* that the board level drivers should be located in a folder named "Board" located inside the application's folder.
*
* When used, the driver stub files located in the LUFA/CodeTemplates/DriverStubs folder should be copied to the user
* Board/ directory, and fleshed out to include the values and code needed to control the custom board hardware. Once
* done, the existing LUFA board level APIs (accessed in the regular LUFA/Drivers/Board/ folder) will redirect to the
* user board drivers, maintaining code compatibility and allowing for a different board to be selected through the
* project makefile with no code changes.
*/