qmk_firmware/keyboards/lets_split/keymaps/OLED_sample
2017-09-27 08:21:09 -10:00
..
config.h
keymap.c
readme.md
rules.mk Remove all Makefiles from the keyboards directory. (#1660) 2017-09-08 13:47:50 -04:00

SSD1306 OLED Display via I2C

Features

Some features supported by the firmware:

  • I2C connection between the two halves is required as the OLED display will use this connection as well. Note this requires pull-up resistors on the data and clock lines.
  • OLED display will connect from either side

Wiring

Work in progress...

OLED Configuration

Work in progress...