d6cc90d027
* S65-X: remove S65-Plus support The original QMK codebase for the Sentraq S65-X actually supported both the S65-X and the S65-Plus. In the interim, the S65-Plus has been broken off into its own directory. This commit removes support for the S65-Plus from the `keyboards/s65_x/` directory, as that code has been superseded by the code in the S65-Plus directory (`keyboards/s65_plus/`). - deleted S65-Plus layout macros from s65_x.h and info.json - deleted s65plus keymap directory - removed references to the unused column pins - removed the two unused columns for the switch matrices - renamed switch K300 in LAYOUT_ansi to K301 (reflects matrix position) - renamed switch K214 in LAYOUT_iso to K114 (reflects matrix position) * S65-X: keymap refactor - all keymaps now use #include QMK_KEYBOARD_H - default and iso keymaps refactored for readability - deleted redundant KC_TRNS and KC_NO keycode definitions from smt keymap * S65-X: readme update - updated Hardware Availability link - updated Docs links * S65-Plus: add LAYOUT_iso data Adds LAYOUT_iso macro to s65_plus.h and info.json, and an ISO layout version of the default keymap. * S65-Plus: refactor default keymap - refactor for alignment/readability - removed fn_actions code block - add empty process_record_user block * S65-Plus: readme update - Hardware Availability link is now a hyperlink - updated Docs links * S65-X: enable 65_ansi and 65_iso community layouts Thi commit allows the Sentraq S65-X to use the 65_ansi and 65_iso community layouts. - LAYOUT_ansi renamed to LAYOUT_65_ansi - LAYOUT_iso renamed to LAYOUT_65_iso - added LAYOUTS rule to rules.mk
69 lines
2.7 KiB
Makefile
69 lines
2.7 KiB
Makefile
|
|
|
|
# MCU name
|
|
#MCU = at90usb1287
|
|
MCU = atmega32u4
|
|
|
|
# Processor frequency.
|
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
# automatically to create a 32-bit value in your source code.
|
|
#
|
|
# This will be an integer division of F_USB below, as it is sourced by
|
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
# does not *change* the processor frequency - it should merely be updated to
|
|
# reflect the processor speed set externally so that the code can use accurate
|
|
# software delays.
|
|
F_CPU = 16000000
|
|
|
|
|
|
#
|
|
# LUFA specific
|
|
#
|
|
# Target architecture (see library "Board Types" documentation).
|
|
ARCH = AVR8
|
|
|
|
# Input clock frequency.
|
|
# This will define a symbol, F_USB, in all source code files equal to the
|
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
# at the end, this will be done automatically to create a 32-bit value in your
|
|
# source code.
|
|
#
|
|
# If no clock division is performed on the input clock inside the AVR (via the
|
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
F_USB = $(F_CPU)
|
|
|
|
# Interrupt driven control endpoint task(+60)
|
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|
|
|
|
|
# Boot Section Size in *bytes*
|
|
# Teensy halfKay 512
|
|
# Teensy++ halfKay 1024
|
|
# Atmel DFU loader 4096
|
|
# LUFA bootloader 4096
|
|
# USBaspLoader 2048
|
|
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
|
|
|
|
|
# Build Options
|
|
# change yes to no to disable
|
|
#
|
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
|
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|
MIDI_ENABLE = no # MIDI controls
|
|
UNICODE_ENABLE = no # Unicode
|
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
AUDIO_ENABLE = no # Audio output on port C6
|
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
|
RGBLIGHT_ENABLE = yes # Enable RGB light
|
|
|
|
LAYOUTS = 65_ansi 65_iso
|