qmk_firmware/keyboards/bajjak
Ryan f111bea3cd
Move miscellaneous layouts to data driven (#20516)
2023-04-25 02:38:35 +10:00
..
keymaps Remove legacy keycodes, part 6 (#18740) 2022-10-16 14:14:40 +01:00
bajjak.c
bajjak.h Move miscellaneous layouts to data driven (#20516) 2023-04-25 02:38:35 +10:00
config.h Make IGNORE_MOD_TAP_INTERRUPT the default behaviour for mod-taps (#20211) 2023-04-03 15:32:47 +10:00
info.json Move miscellaneous layouts to data driven (#20516) 2023-04-25 02:38:35 +10:00
matrix.c
readme.md
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

bajjak

This keyboard is a 6x7 array keyboard, similar in design to the Ergodox EZ.

  • Keyboard Maintainer: Gary Kong
  • Hardware Supported: bajjak keyboard (ATmega32U4)

Make example for this keyboard (after setting up your build environment):

make bajjak:default

Flashing example for this keyboard:

make bajjak:default:flash

Bootloader

Enter the bootloader in 2 ways:

  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.