qmk_firmware/keyboards/bbrfkr/dynamis
Ryan f111bea3cd
Move miscellaneous layouts to data driven (#20516)
2023-04-25 02:38:35 +10:00
..
keymaps Encodermap direction define. (#20454) 2023-04-15 16:18:44 +01:00
config.h Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
dynamis.c Move miscellaneous layouts to data driven (#20516) 2023-04-25 02:38:35 +10:00
info.json Move miscellaneous layouts to data driven (#20516) 2023-04-25 02:38:35 +10:00
readme.md [Keyboard] Update dynamis keyboard (#17625) 2022-08-28 21:47:30 -07:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

dynamis

general information

dynamis

Gasket mounted 65% row staggered keyboard integrated a trackball

bootloader

Enter the bootloader in 2 ways:

  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

build and flash firmware

Make example for this keyboard (after setting up your build environment):

make bbrfkr/dynamis:default

Flashing example for this keyboard:

make bbrfkr/dynamis:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.