History

Konstantin Đorđević 4d9b11af14 Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955 ) * Remove unnecessary IS_COMMAND definition in clueboard/66/rev4 * Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions * Update docs to use get_mods() instead of keyboard_report->mods * Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist * Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)		2019-01-27 00:28:40 -08:00
..
keymaps	Remove unused fn_actions[] and action_function() in default keymaps (#4829 )	2019-01-24 07:38:44 -08:00
util
190hotfix.sh
config.h	Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955 )	2019-01-27 00:28:40 -08:00
ergodox_ez.c
ergodox_ez.h
info.json
matrix.c
readme.md
rules.mk

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default
This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex
Start the teensy loader.
Load the .hex file into it.
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.
Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

Build the firmware with make keymapname, for example make default
Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.