qmk_firmware/keyboards/helix/rev2/keymaps/five_rows_jis/rules.mk

125 lines
4.3 KiB
Makefile

# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
SWAP_HANDS_ENABLE = no # Enable one-hand typing
define HELIX_CUSTOMISE_MSG
$(info Helix customize)
$(info - OLED_ENABLE=$(OLED_ENABLE))
$(info - LED_BACK_ENABLE=$(LED_BACK_ENABLE))
$(info - LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE))
$(info - LED_ANIMATION=$(LED_ANIMATIONS))
$(info - IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE))
endef
# Helix keyboard customize
# you can edit follows 7 Variables
# jp: 以下の7つの変数を必要に応じて編集します。
HELIX_ROWS = 5 # Helix Rows is 4 or 5
OLED_ENABLE = no # OLED_ENABLE
LOCAL_GLCDFONT = no # use each keymaps "helixfont.h" insted of "common/glcdfont.c"
LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
LED_ANIMATIONS = yes # LED animations
IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
Link_Time_Optimization = no # if firmware size over limit, try this option
#### LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
#### Do not enable these with audio at the same time.
### Helix keyboard 'default' keymap: convenient command line option
## make HELIX=<options> helix:defualt
## option= oled | back | under | na | ios
## ex.
## make HELIX=oled helix:defualt
## make HELIX=oled,back helix:defualt
## make HELIX=oled,under helix:defualt
## make HELIX=oled,back,na helix:defualt
## make HELIX=oled,back,ios helix:defualt
##
ifneq ($(strip $(HELIX)),)
ifeq ($(findstring oled,$(HELIX)), oled)
OLED_ENABLE = yes
endif
ifeq ($(findstring back,$(HELIX)), back)
LED_BACK_ENABLE = yes
else ifeq ($(findstring under,$(HELIX)), under)
LED_UNDERGLOW_ENABLE = yes
endif
ifeq ($(findstring na,$(HELIX)), na)
LED_ANIMATIONS = no
endif
ifeq ($(findstring ios,$(HELIX)), ios)
IOS_DEVICE_ENABLE = yes
endif
$(eval $(call HELIX_CUSTOMISE_MSG))
$(info )
endif
# Uncomment these for checking
# jp: コンパイル時にカスタマイズの状態を表示したい時はコメントをはずします。
# $(eval $(call HELIX_CUSTOMISE_MSG))
# $(info )
ifneq ($(strip $(HELIX_ROWS)), 4)
ifneq ($(strip $(HELIX_ROWS)), 5)
$(error HELIX_ROWS = $(strip $(HELIX_ROWS)) is unexpected value)
endif
endif
OPT_DEFS += -DHELIX_ROWS=$(strip $(HELIX_ROWS))
ifeq ($(strip $(LED_BACK_ENABLE)), yes)
RGBLIGHT_ENABLE = yes
OPT_DEFS += -DRGBLED_BACK
ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
$(eval $(call HELIX_CUSTOMISE_MSG))
$(error LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE both 'yes')
endif
else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
RGBLIGHT_ENABLE = yes
else
RGBLIGHT_ENABLE = no
endif
ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
OPT_DEFS += -DIOS_DEVICE_ENABLE
endif
ifeq ($(strip $(LED_ANIMATIONS)), yes)
OPT_DEFS += -DLED_ANIMATIONS
endif
ifeq ($(strip $(OLED_ENABLE)), yes)
OPT_DEFS += -DOLED_ENABLE
endif
ifeq ($(strip $(LOCAL_GLCDFONT)), yes)
OPT_DEFS += -DLOCAL_GLCDFONT
endif
ifeq ($(strip $(Link_Time_Optimization)),yes)
EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
endif
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# Uncomment these for debugging
# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE))
# $(info -- OPT_DEFS=$(OPT_DEFS))
# $(info )