qmk_firmware/keyboards/4pplet/waffling80/rev_a
James Young a5b382beb3
4pplet Waffling80 Community Layout Support and Touch-Up (#20932)
* add matrix_diagram.md

* fix Configurator key sequence

* info.json: apply friendly formatting

* create common info.json

Moves the data-driven keys which are common between Rev A and Rev B to a joint `info.json` file.

* add LAYOUT_tkl_f13_ansi_split_space_split_bs_rshift

* add LAYOUT_tkl_f13_ansi_split_bs_rshift

* add LAYOUT_tkl_f13_ansi

* add LAYOUT_tkl_f13_ansi_tsangan_split_bs_rshift

* add LAYOUT_tkl_f13_ansi_tsangan

* add LAYOUT_tkl_ansi_split_bs_rshift

* add LAYOUT_tkl_ansi

* add LAYOUT_tkl_ansi_tsangan_split_bs_rshift

* add LAYOUT_tkl_ansi_tsangan

* add LAYOUT_tkl_f13_iso_split_space_split_bs_rshift

* add LAYOUT_tkl_f13_iso_split_bs_rshift

* add LAYOUT_tkl_f13_iso

* add LAYOUT_tkl_f13_iso_tsangan_split_bs_rshift

* add LAYOUT_tkl_f13_iso_tsangan

* add LAYOUT_tkl_iso_split_bs_rshift

* add LAYOUT_tkl_iso

* add LAYOUT_tkl_iso_tsangan_split_bs_rshift

* add LAYOUT_tkl_iso_tsangan

* enable Community Layout support
2023-05-14 12:52:10 -07:00
..
config.h Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303) 2023-04-06 18:00:54 +10:00
info.json 4pplet Waffling80 Community Layout Support and Touch-Up (#20932) 2023-05-14 12:52:10 -07:00
readme.md [Keyboard] Adding waffling80, TKL PCB (#16726) 2022-04-12 23:39:44 -07:00
rev_a.c [Keyboard] Adding waffling80, TKL PCB (#16726) 2022-04-12 23:39:44 -07:00
rev_a.h Move single `LAYOUT_all`s to data driven (#20430) 2023-04-15 21:08:15 +10:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

waffling80

A TKL PCB attempting a87 and a88 compatibility with different switch and layout-options.

Make example for this keyboard (after setting up your build environment):

make 4pplet/waffling80/rev_a:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

How to enter bootloader (DFU):

  • Tap the physical reset button or short the reset-header (labled RESET) on tha back of the PCB for keyboard to enter DFU. When in DFU, it's ready to flash the firmware.

Alternative option if the firmware is already pre-flashed:

  • Unplug your keyboard, hold down the Spacebar and B at the same time, plug in your keyboard and wait a second before releasing the keys. The keyboard will enter DFU and is ready to flash the firmware.