qmk_firmware/keyboards/mino/readme.md

1.1 KiB

mino

Mino

A 47 key board with a retro twist.

  • Keyboard Maintainer: ShandonCodes
  • Hardware Supported: Mino PCB
  • Hardware Availability: Groupbuy

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available. For the default keymap it is the middle spacebar on the second layer.

Make example for this keyboard (after setting up your build environment):

make mino/hotswap:default

Flashing example for this keyboard:

make mino/hotswap:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.