qmk_firmware/keyboards/atom47/rev2/readme.md

24 lines
1.1 KiB
Markdown

# Atom47 rev2
This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it.
## Support
Keyboard Maintainer: [Matthew Kerfoot](https://github.com/mkerfoot)
Hardware Supported: Atom47 rev2
Hardware Availability: None
## Features
- QMK Firmware
- In-switch leds
- Through-hole micro usb connector (less likely to break off!)
- Easily reachable reset button under the spacebar
- In-switch CapsLock indicator
## Build
To build the default keymap, simply run `make atom47/rev2:default`.
For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`.
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.