qmk_firmware/keyboards/jaykeeb/jk65/readme.md

28 lines
1.0 KiB
Markdown

# JK65
![jk65]( https://i.imgur.com/NysDAOy.png )
Layout 65% support multi layout and keyboard case exiting
* Keyboard Maintainer: [Alabahuy](https://github.com/Alabahuy)
* Hardware Supported: JK65 PCB, RP2040
* Hardware Availability: Private GB
Make example for this keyboard (after setting up your build environment):
make jaykeeb/jk65:default
Flashing example for this keyboard:
make jaykeeb/jk65:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available